Jump to content
SAU Community

Might be of interest to the track teams....


Recommended Posts

My Sparco harnesses are actually Sabelt. Mine look the biz so these are great value, most this price dont have the quick release buckle...lol you feel quick just doing up the buckle:)

Just be sure they are the long type, as some are "short" type for mounting of roll cage,  most of us need the "long" type to mount off the rear parcel shelf

Where on the parcel shelf are they meant to mount to?

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

lmao its Yum Cha Performance™ not Yum Chow... Or are you even ripping that off with a dodgey company!!

so does anyone actually know the price for them here in aus? cause im not going to do it if we are only going to be saving $50.

When i was looking around i found that ERS were also FIA approved and were a good prioce. I think they are stocked by Gran Munday Performance plus a few otherd down here. Perhaps try them before going thru thw wait and agro of getting stuff from OS. Ill chase up the price if the ERS harnesses tonight and post up.

BUT, its cool to have harnesses, but they aint 100% required for the track, but they do add to the experience:thumbsup:

Just be aure they are installed correctly, cause if there not you may find yourself failing scrutineering:oops:

im going down there now seeing as its around the corner and get me some prices on roll cage padding, bonnet pins, tow hook (i can forsee that coming in handy lol) and a few other safety things.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
    • What sold me on Trailer Park Boys is this scene: Great stuff, just stay clear from the new Netflix production.
×
×
  • Create New...