Jump to content
SAU Community

Recommended Posts

Hi, just about to recieve my R33 and going to do the usual and change every fluid on the car, including gbox and diff oils.

Whats the best pick for this application? I used to get very good results with Mobil 1 gearbox oil on the WRX, but gearboxes can be finnicky and some will work better with some oils.

Any suggestions?

Thanks

Conrad

Spoke to the redline bloke at the Auto Salon on the weekend about this exact issue.

He told me to get the Redline Lightweight Shockproof gearbox and diff oil. Now it's not cheap, like $113 ish for the gallon you are going to require but I've heard lots of good things about it. My oil is getting changed tomorrow for it so i'll let you know if I notice a difference

Cheers

I can't speak more highly of a product than Redline "Shockproof". It's impressive to say the least! I use Redline in the diff & g/box.

This site gives a price guide for Redline products - http://www.gearbox-racing.com/

You need a 1US gallon (3.785L) container for the g/box, & should get @ least 2 diff fluid cx from another 1US Gallon container. It's not cheap but it works very very well.

Redline seems to do a good job with worn syncros. A mates GTR had syncro crunchies and the redline stuff sorted it right out.

If you change your oil (diff and gearbox) on a regular basis you probably will never need to run redline stuff. If you do just remember it doesn't last forever and that goes double if you give you car shtick.

I change my oil (diff & gear every 10-15,000km) I would change it straight after a burnout session (tyre popper) or run at the drags or track though.

Will you find little tiny metal fillings ? yes.

Are metal fillings good for lubrication? no.

Can I go swimming after consuming 2L of Redline shockproof oil? yes you should do it as a matter of courtesy.

Yeah likewise Rev, I change my diff & g/box oil regularly too, in fact given the # of oil cx's to k's traveled it works out to probably every 5k or less!

bugger... i get crunchies into second when the car is cold as well. Does that mean my synchro's are ****ed?

a mate of mine said his gear box was really notchy, and he just had redline shockproof put into his gearbox and he said it made a huge difference. It's got smooth changes now.

I'll be paying the $110+ for this to go in when i change my clutch soon.

--

Andrew

Originally posted by GiJOr33

bugger... i get crunchies into second when the car is cold as well. Does that mean my synchro's are ****ed?

a mate of mine said his gear box was really notchy, and he just had redline shockproof put into his gearbox and he said it made a huge difference. It's got smooth changes now.

I'll be paying the $110+ for this to go in when i change my clutch soon.

--  

Andrew

If the gearbox is cold you should not attempt to shift quickly at high rpms. If it shifts ok when warm don't be too concerned.

There are many different kinds of metal found in the gearbox/diff and they all heat up and expand at different rates. This means that flogging your car whilst warming up from cold will increase the wear and this goes double for the syncros and LSD clutch packs.

nah... i definantly don't flog it when it's warming up... i shift under 2500rpm... and sometimes if it's downhill i'll shift from 1st to 3rd :)

I'm up for a new clutch soon so i'll chuck in some Redline Shockproof trans oil.

I had the crunchies in my gearbox, mostly 1st -> 2nd and 4th -> 5th but occasionally on any gear shift. I put in some Heavy Weight Shockproof oil and all crunching has disappeared, except for 1st -> 2nd when it's cold. No other gears crunch when cold, and when warm even 1st -> 2nd is fine.

I contemplated putting some Lightweight Shockproof Oil in the diff but I would have had to spend the same again (~$100) with LOTS of oil left over and there would be no tangible benefit because the diff never crunches :) So I just put in some LSD-grade diff oil from GP Auto, cost about $20.

I wouldn't say there's no point in putting the Shockproof oil in a new or rebuilt gearbox. The point of it isn't to stop crunching, it's to protect the gears and stop them smashing into each other. If you use it from the very start your gearbox will probably last twice as long. Stopping the crunches on a worn box is just one of the nicer side effects.

When you consider the price of even a reconditioned box, an extra $100 is not much. I will be using it from now on whenever I have to change the box oil.

NIZ30, I have no idea. I mail ordered mine from someplace in Melbourne. What's wrong with mail order out of interest? They did dick me around for a day or 2 because they didn't realise they were out of stock before I placed the order, but it still arrived before the weekend via Express Post (ordered Monday) which is the soonest I was able to put it in anyway.

Try COVENTRY AUTOPARTS in Geebung ph 07 38658133 i think there the only place that sells it in queensland put some light weight shockproof in my GTR's new box was going to put the heavy in but i heard its not recommened for street cars apparantly stops the syncros from working and its a bitch to put in as it is so thick!

Gtr13, the heavy weight oil is good if your gearbox is a little old and crunches a bit. For a new or reconditioned box the lightweight would be better. But for a worn box or maybe a competition/racing box, the heavy is better because it HELPS the synchros work better (ie less crunching), it doesn't hinder them.

And it's not physically much thicker than normal gearbox oil, no easier or harder to put in than any other type. I got a mechanic to do mine anyway so it made no difference to me how difficult it was. I've changed tranny oil in the past and always ended up getting it all over myself. That stuff stinks! I was happy to pay someone to avoid having to smell like that for weeks.

JimX this is a quote from sean morris from motorex in the states

"The guys from Redline say that it (shockproof heavy gear oil)should not be used in a street tranny as it can cause the synchros not to work properly" but he also went on to say that he uses it in big bird R33 GTR's stock tranny and has had no drama's yet . I think your right its better off in competion type boxes with straight cut gears where syncros arn't used and boxes that are crunching quite badly. As for the thickness i havn't seen the heavy but the lightweight oil seemed to be quite thick!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah and hence my ghetto way of slamming the brakes, get the ABS to cycle, rebleed seems to be a sensible workaround.
    • Hey! Happy to help. Nothing inherently wrong with the adapter, it's more so with Brett Collins himself. He gave me a lot of incorrect information when I was in contact with him and was extremely rude when I challenged him. He stated I could not use any aftermarket twin plate clutches except for his own, not to use the dush shield, bla bla bla and it was all BS.  Collins stated to cut roughly 14mm's off the housing, I took off 15mm to make room for the dust shield. I would confirm with whatever adapter manufacturer you're using. 
    • There's plenty of OEM steering arms that are bolted on. Not in the same fashion/orientation as that one, to be sure, but still. Examples of what I'm thinking of would use holes like the ones that have the downward facing studs on the GTR uprights (down the bottom end, under the driveshaft opening, near the lower balljoint) and bolt a steering arm on using only 2 bolts that would be somewhat similarly in shear as these you're complainig about. I reckon old Holdens did that, and I've never seen a broken one of those.
    • Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
    • The roof is wrapped
×
×
  • Create New...