Jump to content
SAU Community

RB26 crank modification

ylwgtr2

By ylwgtr2,
in Victoria

 Share

Recommended Posts

ylwgtr2 Grand Master

ylwgtr2

Posted
Posted

well i have pulled down an RB26 for rebuild and found a knackered crankshaft........new cranks are priced quite resonable so i bought 2 new cranks one for the engine and one for myself....heres the mods that i did on one of them today.......first we set up one end in a 4 jaw chuck,and we put a bearing on the other end and clamp that in a steady rest .....we check its true by placing a dial indicator on the main journal surface and spin the crank in the late....we then adjust it until its true..... then we start machining our first crankweb counterweight,we take it from as close to the rod end journal as we can get it right to the main journal at around a 50 degree angle(i cant remember exactly what the angle was)the working back toward the front end of the crank(you will notice only every second web is getting done,this is because every first web needs to be cut back to the opposite end of the crank,we do this by reversing the crank in the lathe)i managed to get all of the

second webs done today....i will have the first webs done tomorrow then start balancing it...heres the pics

Link to comment
https://www.sau.com.au/forums/topic/51675-rb26-crank-modification/
Share on other sites
inark Grand Master

inark

Posted
Posted

... i have no idea what ur doing... or what it does... but it looks damn impressive :P any pages u can refer me too so i know exactly what this does? or wanna give dummies like me a run down on what this does overall in the way of performance???

Laurence Mentor

Laurence

Posted
Posted

If you make things that spin around lighter, they can spin faster, or more easily, unless you made them too light because then they break. Also if the spinny thing has to sploosh through oil it is easier if there is a nice edge on it.

I think ylwgtr2 should probably post a pic of the bucket of metal filings that must have come off those cranks to give people a better idea.

Snowman Grand Master

Snowman

Posted
Posted
... i have no idea what ur doing... or what it does... but it looks damn impressive :P any pages u can refer me too so i know exactly what this does? or wanna give dummies like me a run down on what this does overall in the way of performance???

I have this problem just about every time I speak to troy! LOL

He's always doing something that is way beyond my comprehension - I just have to nod and presume what he's doing is a good thing!

inark Grand Master

inark

Posted
Posted
I have this problem just about every time I speak to troy! LOL

He's always doing something that is way beyond my comprehension - I just have to nod and presume what he's doing is a good thing!

its amazing how a lot of people seem to get this issue when troy speaks :P

troy... from now on i reckon u need to dumb it down a little for us.

ylwgtr2 Grand Master

ylwgtr2

Posted
  • Author
Posted
... i have no idea what ur doing... or what it does... but it looks damn impressive :P any pages u can refer me too so i know exactly what this does? or wanna give dummies like me a run down on what this does overall in the way of performance???

ok......gojira is pretty much on the money....."rotating mass" is the word for today.....Ever fitted a lightned flywheel?(andrew? ;))Its the same deal with cranks,pistons,rods and any thing thats rotating or reciprocating...the lighter it is the easier it will move and the less force it will take....therefore more response however there are trade offs.....example you will find that an engine that is made for smooth power will have heavier crank assembley(balancer and flywheel included)For take off heavy crank assemblys are good eg an idle no accelerator take off is easy......but try doing is with a light set up and you will most likely stall....This is because of the "stored energy" in the heavy setup is greater for obvious reasons....ITS HEAVIER!So in laymans terms it takes more grunt to drive a heavier flywheel/crank assembly but our aim is not to sit at constant speed...its to get it to the point of where everything happens in a hurry!Hope that makes some sense.....Oh and messing with the crank doesnt really cause them to break......its poor balance that usually does that...if you have a look at my doctored pic you will see the red line....thats the part that takes the stress i have only just taken the cast marks out of that.....the real weight has been taken off the crank webs on the opposite side.....just spinning the crank up it seems so much more "right"......you can see the crank doing "its thing" in the last pic

ylwgtr2 Grand Master

ylwgtr2

Posted
  • Author
Posted

oh and in the 3rd pic the left hand side of the conrod journal has been "done" and the right hand hasnt been done yet so you can see there is no material taken off the the "Power transfer section"of the crank

ylwgtr2 Grand Master

ylwgtr2

Posted
  • Author
Posted
This is a great thread! keep up the good work :P

Im glad your enjoying it!.......In regards to gojira's "oil splooshing"comment this engine will also wear a "crank scraper plate"Which runs a tight clearance between it and the crank edge....this removes any oil from the crank to stop it flinging all around the show inside the engine block....more on this later

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...