Jump to content
SAU Community

Recommended Posts

Hey, I have an 86' Pintara GXE. And I want to upgrade the engine to an rb20det. Is that the best engine to go with for this car? It's got the ca20e in it now (i think? im not a huge car engine know it all person). I just wanna know what else will need to be done if i upgrade to this engine and how much you think its going to cost me. I'll need someone to install it too. If you can give me a price range, that'd be awsome...

This isnt just your usual crap Pintara either, it's a nice one and I might be able to get some pic's for ya. So I dont want anyone tellin me I'm wastin my time. Any help would be greatly appreciated guys, thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/51915-pintara-upgrade/
Share on other sites

yeah, that would be me. I think it would be worth doing, and it doesn't matter what other people think. As long as you love your car. You will be looking at around $1800 for a r32 halfcut. Then You will need to modify your engine mounts a bit which unless you know what your doing, you will have to get them done professionally. Then get then drop then engine in and it will cost around a $1000 for the engine to be wired etc.

here's some pics of my 86' Pintara

http://75degreessideways.boostcruising.com/

Have you got any pics of yours?

Link to comment
https://www.sau.com.au/forums/topic/51915-pintara-upgrade/#findComment-1028834
Share on other sites

yes that definately right. You will be looking at around $500 for the hr31 struts and hubs. I was fortunate enough to pick mine up for $250. You can use r32 gts-t or gt-r rotors and calipers which are bolt on and i've seen them sell for round 200-250 mark for just the front..

Link to comment
https://www.sau.com.au/forums/topic/51915-pintara-upgrade/#findComment-1034284
Share on other sites

Is it hard? or hard to get someone to do it? I'm about to manual convert my (RB30) Pintara and only found out in the last few weeks that the manual crossmembers are different...sounds like fun :S

Back on topic...theres quite a few RB20 Pintara's going around.

Link to comment
https://www.sau.com.au/forums/topic/51915-pintara-upgrade/#findComment-1036571
Share on other sites

Yeah, this one has power steering.

I got some pics i took the other day, car went in to get some stuff done on it... and they took it for a quick test drive and someone crashed into my car :cheers:

It's getting fixed now, going to take about 2 weeks to repair.

http://tordek.no-ip.org/http/ryans_car/

Not real good ones of the general overview of the car, but that's all i have right now.

Link to comment
https://www.sau.com.au/forums/topic/51915-pintara-upgrade/#findComment-1037616
Share on other sites

Is it hard? or hard to get someone to do it? I'm about to manual convert my (RB30) Pintara and only found out in the last few weeks that the manual crossmembers are different...sounds like fun :S  

Back on topic...theres quite a few RB20 Pintara's going around.

Depends how handy you are! It'd certainly cost a few hundred to get someone to make one for you.If you can weld/oxy,then a custom Xmember is only half a day's work away :P

Link to comment
https://www.sau.com.au/forums/topic/51915-pintara-upgrade/#findComment-1039249
Share on other sites

Yeah, this one has power steering.

I got some pics i took the other day, car went in to get some stuff done on it... and they took it for a quick test drive and someone crashed into my car :)

It's getting fixed now, going to take about 2 weeks to repair.

http://tordek.no-ip.org/http/ryans_car/

Not real good ones of the general overview of the car, but that's all i have right now.

Hey I think I've seen your car before, I had to take a second look cos I thought it was a silo.

Depends how handy you are! It'd certainly cost a few hundred to get someone to make one for you.If you can weld/oxy,then a custom Xmember is only half a day's work away :P

Thanks :) If my mate can't manage to do it then I guess I can take it somewhere.

Link to comment
https://www.sau.com.au/forums/topic/51915-pintara-upgrade/#findComment-1044357
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...