Jump to content
SAU Community

Recommended Posts

How makes the better adjustable cam wheels for a '98 SII Gts2.5t?

I only want an exhaust cam at this point [or so I have been advised].

I know they are about $200, and HKS, Tomei, OS Giken etc etc make them, but is there any difference in applicacation?

Link to comment
https://www.sau.com.au/forums/topic/52243-adjustable-cam-wheels/
Share on other sites

im goin for HKS but alot of ppl told me the Tomei ones are best...

i also heard that some ppl change only the exhaust side in gts-t's and not the inlet side...would like to have some comments on this too if anyone knows...

cheers...ben.

I have had HKS items, and I would say from my experience steer clear. They wore down in no time. I think they're made from aluminium or something, thats why they wear faster. I believe Tomei items are stainless steel and so last heaps longer.

If someone would like to correct me here these please do. I'd rather know the truth than talk outta my arse, but my HKS experience wasn't a good one (WASTE of MONEY) and what I know I got from my engine builder.

I have had HKS items, and I would say from my experience steer clear.  They wore down in no time.  I think they're made from aluminium or something, thats why they wear faster.  I believe Tomei items are stainless steel and so last heaps longer.

If someone would like to correct me here these please do.  I'd rather know the truth than talk outta my arse, but my HKS experience wasn't a good one (WASTE of MONEY) and what I know I got from my engine builder.

Hi guys, HKS pulleys are made from hardened alloy and seem to be the lightest, I haven't weighed all brands though. I have seen 1 pair of worn HKS pulleys and the cambelt was so tight you could play it like a violin. I have seen many pairs not showing any wear, but the cambelts were tensioned correctly. I have never seen a stainless steel camshaft pulley. They would weigh so much it would be like having 3 flywheels anyway.

I use the Jun adj pulleys, they utilise the standard Nissan outer with a billet alloy inner to give the adjustment. So the durability is the same as the standard pulleys with regard to teeth. They are very boring to look at, but I always run covers so you can't see them anyway.

If someone wants to send me one of every type of pulley, we have a rockwell tester so I can confirm the teeth hardness of each brand. It's not a destruction test, you will get them back able to be used. If someone who had a problem with the HKS pulleys had done a proper hardness test and found them to be deficient I am sure they would have gotten more than their money back.

Hope that makes sense :uh-huh:

Try the ones from Speed Technology / EFI Hardware in Melbourne. They don't come in pretty anodised colours, and they don't have degree markings on the wheel, but they are a lot cheaper than the "brand names", and they do exactly the same job.

im goin for HKS but alot of ppl told me the Tomei ones are best...

i also heard that some ppl change only the exhaust side in gts-t's and not the inlet side...would like to have some comments on this too if anyone knows...

cheers...ben.

Its to do with the VVT [variable valve timing], if you install a cam wheel on the inlet side, you loose the VVT. The loss then outweighs the benefit. Thanks to SK for this advice.

My debt to SK increases by the hour...........................[i'll end up having to sell my body to science just to get enough money to pay him].

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...