Jump to content
SAU Community

Recommended Posts

Hey Guys,

In prep. for the track day at Sandown next month I'm getting the brake fluid changed to a track ready spec so I don't boil it after a couple of laps :flamer:

For those of you (read: any Team Wang members :) )who have changed their brake fluid to a track ready type (higher boiling point) which readily available brake fluid would you recommend for a r33 gtst?? Just to note that the setup is std except for upgraded pads.

Also are there any compromises to using this fluid on the streets?

Thanks

ant95gtr.

Link to comment
https://www.sau.com.au/forums/topic/52320-which-brake-fluid-to-use/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

I use the Castrol SRF. Its (apparently) the best - but will send you broke.

Most of the guys use the Motul Dot 5.1. The only adverse effect I know about high quality brake fluids is the lightening of the wallet effect. I stand to be corrected on this however.

Thanks for all the info guys.....had my car at calder a couple of weekends ago at a driver training session.....the comp. circuit isn't very long or hard on brakes but by the end of the day I had to stick my foot through the pedal in order to wash off any speed. Not the best feeling when hoofing ur car round a track ;) I figure that sandown is waaay harder on brakes so gotta get that fluid changed!

Yeh brake fluid is important, and i have no doubt that the Castrol stuff it top shelf, but i suspect most of use can make do with less.

I posted this before...

... i use AP Racing Formula DOT 5.1 Road/Competition Brake & Clutch Fluid. Part No. CP4510 , but may change to Motul RBF 600 whish i have heard good things about. Cheaper and still very effective is the Caltex GP 600 Racing Brake Fluid.

There are lots of guys running the Caltex up in Sydney as Race Brakes up there are now readily using it in all the street / track cars as they have been getting good results with it and it almost a third of the price of the AP stuff i use....from memory it cost $30 for 600ml .

Disregard above post....i need new fluid and pads before Sandown as well so just got some prices together.

The two parties i spoke to said dont bother with anyting other then Motul RBF600, which is $25 for 500ml. They are using in Stokell's Diablo and its working better then all the previous fluids. So good enough for me.

Also as far as pads go, (Prices are all form Race Brakes - Melb)

DS3000 are $385

Track only...save your road pads for the road and race pads for the track. They are actually easier on rotors with less grinsing when they are aup to temperature...so noise isnt the only reason not to use them on the street

DS2500 are $231

Road/track but as Snowman will tell you they aint exactly a great road pad.

RB74 are $160

What i have been using and have always been very happy with, Race Brakes still seem to think they will be up the job at Sandown given my cars weight power and tyres.

As my RB74s have about another 6-9 months of normal driving in them, im leaning towards the DS3000s (or the SAUWA - Hawks) for the track, since ill be changing wheels its only an extra 5 min per corner.

I am going to tack onto this thread and add...

Just got back from picking the car up from Meridian, top stuff in spending like 7 hours fitting the oil cooler to my beast!

I was initially going to get a set of Endless CC-R ceramic pads, but brent from nengun can't seem to source / get the parts... so... time is running out and I need to sort out my brakes.

Was talking to Toby at Meridian, and he was considering organising a group buy on braided lines (though prob not before Sandown).

Also, he uses an ATE brake fluid, one litre for like 50 bucks.

As for pads... thinking the RB74s might get a guernsey as a stop gap before I get these Endless pads. Does anyone think it is worth doing the DS2500s?

I have just fitted a set of ADR approved braided brake and clutch lines. I purchased these for $420 (brakes: front and rear) and $70 (clutch). The brakes are a two piece hose with a block in the middle, just like the originals, and bolt up in the original fittings. I have not yet felt the brakes as the car is still at the w/shop.

MALTECH: Brake Hoses & Cables

0418 378 939

(03) 5253 1931

I am going to tack onto this thread and add...

Just got back from picking the car up from Meridian, top stuff in spending like 7 hours fitting the oil cooler to my beast!

I was initially going to get a set of Endless CC-R ceramic pads, but brent from nengun can't seem to source / get the parts... so... time is running out and I need to sort out my brakes.

Was talking to Toby at Meridian, and he was considering organising a group buy on braided lines (though prob not before Sandown).

Also, he uses an ATE brake fluid, one litre for like 50 bucks.

As for pads... thinking the RB74s might get a guernsey as a stop gap before I get these Endless pads. Does anyone think it is worth doing the DS2500s?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...