Jump to content
SAU Community

Recommended Posts

Same thing happened to me today when I went into the office... people coming up to me, "did you hear about the skyline accident"... I'm like yeah, I knew about it before I got to work. Just because I drive a skyline doesnt mean I give a shit. It's incidents like this that make owning an import even harder... careless moron fcukwits.

  • Replies 270
  • Created
  • Last Reply

Top Posters In This Topic

The death took Victoria's road toll to 271, 19 more than at the same time last year.

shows just how well bracksie's 3km/h tolerance is helping the motorists and not his back-pocket "supposedly"

Just because I drive a skyline doesnt mean I give a shit. It's incidents like this that make owning an import even harder... careless moron fcukwits.
I agree.
i think P platers should have better training b4 they can drive
There is a reason for the power-to-weight ratio law - which makes it illegal for P-platers to drive these type of cars. Worse still is they then modify them for even more power and expect to keep them on the road - without traction control or much actual driving experience.

In this instance I don't know for sure what happened but I have seen plenty of p-platers doing sideways driving on the street - its only a matter of time before they hit a pole, seen it too many times but not just skylines either!

Flame Suit On :)

Bloody idiots, yet another reason why 18-21 y.o's should be kept out of these cars!

I agree.

Similar thread here: http://www.skylinesaustralia.com/forums/sh...d.php?p=1036728

No I agree mate, too many P platers in R33's etc. I mean if I can wait untill I'm 21 to drive a turbo so can everyone else in my opinion. I don't care what ANYONE says R33 Turbos are a handfull for drivers on P's and for all you P platers about to flame don't bother, We are older, We've been there and we know better :)

NismoR34 mate i kinda agree with you im on my P's and i do have a skyline... but i dont go round trying to make it drift i respect my car and it's power... it would be good to see the cops have tollerance for people who do the right thing, to just pull someone over for nothing and drill them i dont see fair... but i also find most of the time the people causing half the Drift and Drag problems are VL drivers....

i got my r33 when i was off my P's... i can tell u that after driving a front wheel drive corolla for 3 years before that the skyline was a huge handfull. regardless how careful u are its the once or twice a year u do something stupid is the time it stings ya.

*

*

*

www.carnetik.com

NismoR34 mate i kinda agree with you im on my P's and i do have a skyline... but i dont go round trying to make it drift i respect my car and it's power... it would be good to see the cops have tollerance for people who do the right thing, to just pull someone over for nothing and drill them i dont see fair... but i also find most of the time the people causing half the Drift and Drag problems are VL drivers....

Yes for some people, perhaps there should be tolerance but how do they workout the good drivers from the bad?

From the start of this year up until about July I was getting pulled over "randomly" at least once a month - police were generally nice to me but it was getting annoying.

The reasons I kept getting pulled over [police have told me these things]:

* the type of car i drive

* being on dandenong rd [i live just off it in malvern east so hard to avoid really]

* the reputation drivers of these cars have generated

* cars like this street racing

* etc

yea na mate i agree with you i have been driving since i was 16 on me l's and drove cars from me mums front wheel mazda to a rear wheel V6. When on me L's i admit in the V6 i was a lil stupid burnouts etc... but when i got my lancer which is gutless as .... i learnt to respect the and the road and it's rules never been booked for nothing... now that i have my skyline it's the same deal.. i dont drive the car because it's powerful i drive it because of my passion for cars... i just feel it should come down to a person by person situation not be judged on what everyone else does and how they drive... it's always the small group that wrecks it for everyone i say....

Its sad to see situations like this occuring, could it be too much power not enough experience?? I could also be the fact the guy had his mates in the car and he pushed it too hard!!! People should never drive out of their comfort zones!!!

In my opinon first car buyers should buy something else as a first car to get used to driving, then when purchasing a faster car as a second car you have general driving experience, although it is still alot different especially in adverse conditions. An advanced driving course would be a good idea!!!

take it easy

Mark

Bloody idiots, yet another reason why 18-21 y.o's should be kept out of these cars!

**cough**

ive had sky's for the past 3 years, since i was 18 :)

but then, i started with a stocker and drove that for a year

Fair enough it is hard to distinguish between good and bad drivers but to pull you over constantly is just ridicules. if you were speeding or what ever fine but to pull you over for no reason is my argument... sure it's hard they want to stop people doing stupid stuff but i believe only pull someone over for doing the wrong thing.... as the law apparently say you are innocent until proven guilty.. which should mean don’t pull someone over unless they are doing something wrong don’t assume they will do the wrong thing..

Marvic.

I understand your point, but......

How much is one life worth? Is it worth being pulled up every now and then? Is it worth your time? How would you feel if your brother or sister or mother or father or girlfriend was killed by a ****wit in a speeding car? What if it was P Plater ILLEGALLY driving a car which they shouldn't have been? How much blood would you want to extract from that person?

Then think that maybe, if that person was pulled over for no reason days before running your loved one over, he/she may have toned down their driving and not killed somebody.

I'm not getting up on my high horse or anything like that, but at the end of the day, you're driving a car illegally and similar car just killed somebody. If you were the cop who had to scrape some kids head off a pole, you'd probably pull people over too.

Also, you had to have known than when you bought the car that the Police would have an interest in you. You just gotta deal with it.

Sometimes we gotta look at things from a fact basis. Not emotionally.

BASS OTU

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...