Jump to content
SAU Community

Recommended Posts

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

I saw a Stagea run an 11, that's a fast boat.:)

Hi Have you towed any of the race cars yet with the Stagea?

Used your suggested suspension settings on my R33 track car's first outing....result very good, pretty neutral handling with good front end turn in. thanks :D

Hi    Have you towed any of the race cars yet with the Stagea?

 

 Used your suggested suspension settings on my R33 track car's first outing....result very good, pretty neutral handling with good front end turn in.   thanks :D

Good to hear, you need to fine tune the settings to your personal tastes, but it's a good place to start. As for Stagea towing, I haven't found a tow bar with enough capacity yet, still looking

:)

  • 3 months later...
Yeh when is the Winton UAS day? Im in melbourne and will be trying to convince some of the hillbillies down here to make the trip north for the weekend...:(

Could get down there one day although more likely to go to Qld. Waiting for my custom trailer to be finished.

The boat is getting pumped even more. Found the valves were badly worn from too much boost and not enough valve spring pressure even though the springs were twice factoryspec. Now have Supertech .5mm oversized valves. Found Arias chrome rings not best for high temp and boost as they wore out, so going 40 thou oversized Ross pistons with full steel rings gas nitrided and proven in big boost drag cars. All cryogenic treated. Changing turbo's from S15 to Disco potato GT28RS 440hp each. Getting the exh housings high temp HPC coated and if have time will get comp housings extrusion honed. Should make 450rwkw with if anything a little more lag which won't hurt it. Might even get semi slicks on to keep things more honnest hey FATZ?

  • 4 weeks later...

Next UAS track Sunday 1st May Wakefield and keep your eyes on your mirrors please.

Roy Porsche 6 piston GT3 Carrear cup Monoblock's lightwieght, brand new can do $800 each. Second hand $650 each. I know you would use them.

  • 3 weeks later...

Put new motor in and new D2 suspension and went to Nissan Datsun Nationals Easter Sunday at Wakefield. Only got three runs on the full circuit and only managed a 1 min 9.48 although still fastest car on the day next fasted was a Dato 120y coupe FJ20 near 200rwkw 900kg 2 seconds slower. Heaps of zeds and a few Skylines and a R32 GTR. Got back and pulled motor out Tuesday to remove turbo's to get extrude honed and high temp coated and a few other minor changes then going back in next few weeks ready for our track day. Bring on your GTR's or GTS-T's.

PS more GTR parts as now has GTR bronze valve guides and valve stem seals. We measured and found the valve guides to be slightly shorter and protrude less into the ports so less restriction and proven on flow bench test.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...