Jump to content
SAU Community

Recommended Posts

Just wondering if anyone who has or is importing an R32 GTR could shed some light on the process for me, and give me some tips for things to look for as far as condition and costs Iam going to be up for with fixing the car up.. I've heard prestigemotorsport is one of the best to go with.. Did any of you get bank loans for these cars if you did I do need some advice in that area as well... Any help would be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/53294-importing-a-r32-gtr/
Share on other sites

There are heaps of threads in the importation forum that have all the info you need, or just do a search.

:werd:

but for god sake don't buy and import a 15yo GTR if you need a loan to pay for it.

Insurance is a killer, and you need it if you have a loan.

The quality of the car that arrives is a lucky dip...will you have $6000 if you need to rebuild the engine when it gets here?

Last thing you want is a great car like a GTR sitting broken in the garage for 6 months while you pay off a loan on it

If you go to any of these Brokers you may as well go to www.japanautodirect.com as the links show the same cars at various brokers as stock and you dont have to pay the $1,100.

and read this link, http://www.skylinesaustralia.com/forums/sh...ead.php?t=53975

Links at various sites coming from the Aussie Brokers showing same stock.

http://www.meisei.com.au/index.htm?formcode[objective]=cardetails&formdata[carid]=27652

http://www.prestigemotorsport.com.au/au/st...sp?StockID=2489

http://www.imports101.com.au/view.php?car=1109

http://www.japanautodirect.com/auto.specsh...heet.cfm?id=219

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...