Jump to content
SAU Community

Recommended Posts

Can't you just copy/paste ... registering is annoying.

Victoria Police could soon have the power to confiscate young drivers' cars under tough new laws being considered by the State Government.

Police Minister Andre Haermeyer said a proposal for new "anti-hooning legislation" would soon be referred to the Government's Ministerial Road Safety Council for consideration.

The Police Minister, Transport Minister and Attorney-General have discussed the idea and weighed up the value of the proposed law, as a powerful deterrant to erratic driving behaviour, against civil liberty concerns.

Mr Haermeyer said he would discuss the success of anti-hooning laws operating in other states with fellow police ministers at next month's Australasian Police Ministers' Council. In addition, Mr Haermeyer has already asked his department to examine what impact the laws were having in other states.

The Police Minister said a decision on new laws could be made in coming months. While anti-hooning laws adopted in states including Tasmania, Western Australia, Queensland and NSW vary, seizure of an offender's car is a common punishment

In NSW, more than 2000 cars have been confiscated under the state's Traffic Amendment (Street and Illegal Drag Racing) Act 1996, while in Queensland police have already confiscated more than 1400 cars since its anti-hooning laws were introduced two years ago.

In Tasmania, where the new laws came into effect two weeks ago, three cars have already been seized, and in Western Australia a teenage driver's car was reportedly confiscated less than two hours after similar laws came into effect there last month.

The state laws all target hoon driving behaviour and cover offences such as excess noise, illegal street racing, refusal to leave a public place, exhibitions of acceleration and burn-outs.

Under Tasmania's new laws, a car can be impounded for 48 hours for a first offence, three months for a second, and indefinitely for a third.

Mr Haermeyer said he "absolutely supported a review of Victoria's current laws" concerning hoon-style driving by mostly young and inexperienced motorists.

The move to strengthen Victoria's driving laws follows the death of two young men a fortnight ago when the car in which they were passengers smashed into a pole on Dandenong Road in St Kilda.

The driver of the vehicle has been charged with two counts of culpable driving and police described where the men were killed as having a "history over the years of cars using this sector of road for racing".

"The hoons have the most serious attitudinal problem of the lot, because it is not just a case of occasional speeding," Mr Haermeyer said.

"They have an attitude to driving that is utterly reckless. Their whole driving behaviour is very dangerous and they often see their cars as an extension of their libidos. It is nearly always young males."

Police in Melbourne's northern suburbs said mobile phone SMS technology and new roads such as the Western Ring Road, had led to a surge in illegal drag-

racing and street burn-outs. Young drivers from across Melbourne were now able to gather for a burn-out session within 20 minutes of receiving a text message.

On Thursday night, members of Victoria Police's region three traffic task unit, based at Epping, blitzed the northern suburbs of Melbourne for "hoon" drivers.

Dozens of cars packed with teenagers were seen scouting vacant industrial areas for spots to drag race and do burn-outs. Erratic and dangerous driving are all too common in the area, and Thursday night was no exception.

Just before midnight, a 20-year-old Epping man failed to pull over for a random licence check. Instead, he fled from police up Edgars Road in Lalor, a 70 km/h zone, at speeds approaching 140 km/h, crashing moments later through the front brick fence of a Lalor house.

Sergeant George Zamola, of the traffic task unit, said the man had been charged on summons with driving while his licence was suspended, drink driving and for driving in a dangerous manner, among other offences.

Only blocks away, in November, a P-plater travelling at 140 km/h in a 60 km/h zone, smashed his high-powered Mazda RX-7 coupe into an oncoming car.

A Country Court Judge sentenced the man on Friday to 14 months' detention in a youth training centre.

"Nobody has any tolerance for people who drive cars in a reckless manner and put lives at risk," the Police Minister said. That is why he was interested in examining tough new anti-hoon legislation.

"On the face of it, I can see the attraction of the proposition," he said.

Mr Haermeyer said road law reform in this area was an issue that he was "very serious about", but there was no "signed, sealed and delivered" decision supporting new laws.

"There need to be some evaluations done of not just the benefits but also any unintended consequences," he said.

For those drivers who owned their cars, the new laws could act as a big deterrent, he said, but it was not so much of a deterrent if it was not their car.

"There is no single panacea that will solve these issues, I think a whole lot of policy responses need to come together to change that behaviour," Mr Haermeyer said.

One initiative will be the opening of a "dob in a hoon" telephone hotline in the City of Brimbank.

The hotline is expected to open in mid-November

fark me dead.

might need to sit down with a lot of different club reps from various Vic clubs to try and stop this kinda crap coming in.

I know in WA & Tazzie its causing the guys a hella-pain with coppers going way over the limits and havig a big case of power abuse

what particularly gets me

exhibitions of acceleration

So they can get you for accelerating fast to the speed limit? What a load of sh|t

Why do holden make a 300kw car then? to nana-foot it to 100km/h?

the acceleration rules have been around for a while. i believe it's up to teh cop's best judgement of what is reasonable acceleration, so it's not like a speed limit where you're either speeding or not.

yea i read this in the age this morning... that dob-a-hoon thing is so bullshit. I can ring up and dob you guys in without any proof and you guys end up getting an EPA or someshit , that not right :confused:

Yeah i love ringing up and dobbing in old grandma's that drive to slow - bloody hoons!

I considered ringing up the other day because i saw a guy in a ford with custom plates through about 3 bags of macca's out the window at the traffic lights, but i settled with just calling him bad names.

car can be taken for noise??? thats the ***in dumbest thing ive ever heard... and like ash has already pointed out what determines "acceleration"?

a porsche GT3 can accelerate to 100 in like 3 seconds or some shit... as long as its on a road where u can do 100 what is the problem?

what a great time to pick to start driving an Japanese import :D

altho, i really don't have to worry about this 'impound' rule cos i wouldn't BE STUPID ENOUGH TO GO MEET UP WITH A GROUP OF F*CKWITS DOING BURNOUTS IN AN INTERSECTION BECAUSE THEY GOT A "FUL SIK" SMS TO DO SO :)

tossers.

also

refusal to leave a public place

we cant have a meet in a car-park safely.

copper comes along... new powers are in place and he then decides to be a c0ck about it (which i wouldnt be slightly surprised at)

And we cant have a meet? In a public place? We are public are we not?

some stern opposition will come out if this ever gets more mention

and like ash has already pointed out what determines "acceleration"?

a porsche GT3 can accelerate to 100 in like 3 seconds or some shit... as long as its on a road where u can do 100 what is the problem?

Dont exaggerate too quickly nark - you will cop a fine :(

Acceleration 0-100Km/h ~ 4.1 secs - 996 MY04 Coupe GT2 2dr Man 6sp 3.6TT

Acceleration 0-100Km/h ~ 4.4 secs - 996 MY04 Coupe GT3 RS 2dr Man 6sp 3.6i (May onwards)

obviously this will effect every motoring enthusiasts. Besides imports, if this legislation comes into effect I think the local performance vehicle manufacturarors such as holden and ford will suffer as a result of this, I can see them putting their hands up saying hey hey hey, weather they have a say in this or not. But there is no doubt they'll have big downfall in sales...

Dont exaggerate too quickly nark - you will cop a fine :)

 

Acceleration 0-100Km/h ~ 4.1 secs - 996 MY04 Coupe GT2 2dr Man 6sp 3.6TT

Acceleration 0-100Km/h ~ 4.4 secs - 996 MY04 Coupe GT3 RS 2dr Man 6sp 3.6i (May onwards)

Acceleration 0-100Km/h ~ 0.1 secs - R33 GTR LEEWAH

fark me dead.

might need to sit down with a lot of different club reps from various Vic clubs to try and stop this kinda crap coming in.

I know in WA & Tazzie its causing the guys a hella-pain with coppers going way over the limits and havig a big case of power abuse

what particularly gets me  

So they can get you for accelerating fast to the speed limit? What a load of sh|t

Why do holden make a 300kw car then? to nana-foot it to 100km/h?

Yeap, I hope the diff official car club reps would be able to come together to discuss the "proposals" together with the governing body to ensure that the legislation is not going to be overboard.... it is kinda of scary (and stupid) that one has to think of how much to accelerate from stationary....!!!!

Btw, maybe holden should become a role model - by making bicycles instead of cars....

:jester:

Well guys, the best way is to have a Lawyer bussines card in your wallet just in case. Best is to have ones that belong to those who cops would call traitors.

What i meant by traitors is experience cops, those who had been in the force for so long then quit and become lawyer. Not normal lawyer but those who only take cases that complain or sue against the cops. Cops really hate and afraid of these guys.

But after all, we shouldn't even need to dicuss about these issue if it wasn't some ****wit reall HOONs out there that give us bad names. I enjoy my skyline and i'm sure you all do. The powers, the torque, cruising around...ect..the too rear lights ofcourse, the luxury ( love my climate control )......shits that domestic cars can't not offer us.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
×
×
  • Create New...