Jump to content
SAU Community

Walbro 255lph Model GSS-341


BLakniTE
 Share

Recommended Posts

http://www.directebook.net/walbro.jpg

Walbro 255lph High Pressure Fuel Pumps

Model GSS-341 with 400-766 fitting kit

supports 500hp

Pump and kit comes with everything needed to plug and play

*UPDATE* - Spoke to the supplier and he said he can do each fuel pump for:

- $170.00 each (5-10)

- $160.00 each (10+)

Also for all Melbourne buyers, installation is available for $35.00 (drive-in, drive-out price) from EX-MOD Performance located in the SE suburbs.

Once I get a decent number I will go ahead and confirm a cut-off date.

thanks

*This group-buy will end on the 12/11/2004, so please only if you are 100% please post.

POSTAGE = $10 anywhere in Australia.

Thanks*

So far:

- Abo Rob

- predator

- Cameron (x2)

- Jay95R33

- Nexus9

- gtst25

- Jolinator

- knore

- Silver Gts-t

- Sal (x2)

- Nightcrawler

*LATEST*

For all above please can you please PM me for my bank details if still wanted to go ahead. Last day is Friday so last day for payments will be then. Please also indicate if extra for post will be included.

Thanks.

Link to comment
Share on other sites

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

it wont run rich as such. Your ECU controls the flow. When you boost your car, the ECU will send more fuel to come in to avoid running lean.

The standard fuel pump can only release a certain amount of fuel so what this fuel pump does it increase the flow, in the end increasing performance and reducing the chance of engine damage and pinging.

Link to comment
Share on other sites

Guys,

I might be out of line here but rather than asking a bunch of comparitive detailed questions of the guy organising the group buy, how about we all do our own research? You need to convince yourself that this is what you want. He is not selling it to you, he's getting it for you.

It's not like this pump is an unknown quantity and even on this very forum you will probably find all that you need. Perhaps as interested people do the searches they might like to post links to any good info that they find.

It's just that I've seen a smiliar sort of thing in a couple of group buys now and the person organising it can very easily get the shits with it all and decide it too hard then we all lose out.

Let's all help each other here.

:D

Link to comment
Share on other sites

ok, to give some light on some of the questions ...

I bought one of these, and fitted it a couple of weeks ago, paid $200 for it shipped ... gah ..

anyway, i did do a thread on the forums about it but below is a list of things i found...

1. removal of the old pump is easy, the hardest part of removing the black screw ring around the tank access pannel.

2. everything just fits with this walbro ! the ONLY thing you have to modify is the electrical connections to plug in the new pump, but you get everything you need to do this anyway ... all you need for the mod is a pair of pliars.

3. you can easily use the existing mounting bracket, the new pump even comes with a rubber gromet / brush type thing that fits into the bottom of the bracket, and lets the new pump fit perfectly. you don't need the extra fuel tube that comes with the pump, or the clamps.

4. the new pump is a LOT thinner than the stocker, so does not sit flush against the bracket along the length of the pump, its not a prob as its held in pretty well on the top and bottom, i just decided to whack a couple of zip ties around it anyway ..

5. the sock filter from the stock pump fits directly onto the new pump, you don't need the filter that comes with the new pump.

6. it does not seem to run any richer than before with the new pump, the 255lph is only what it CAN deliver, not what it does deliver all the time ... your injectors, and pressure reg will control how much fuel the engine actually gets ...

and thats all i have to say about that ...

hope some of your questions may have been answered ...

cheers

Baz

Guys,

 

I might be out of line here but rather than asking a bunch of comparitive detailed questions of the guy organising the group buy, how about we all do our own research?  You need to convince yourself that this is what you want.  He is not selling it to you, he's getting it for you.

 

It's not like this pump is an unknown quantity and even on this very forum you will probably find all that you need.  Perhaps as interested people do the searches they might like to post links to any good info that they find.

 

It's just that I've seen a smiliar sort of thing in a couple of group buys now and the person organising it can very easily get the shits with it all and decide it too hard then we all lose out.

 

Let's all help each other here.

 

:D

Link to comment
Share on other sites

Like Mr Bob says.. there is plenty of info on thse in the forced induction section.. they are a nice fit for an R33 or R32.. and good for up to around 250rwkw, maybe a bit more.

When I analysed them apples for apples to an Bosch 910( using same pressure) they are pretty much the same as this.

So they are a great upgrade ! and easy to fit..1 hr if you don't even know what you are doing. Even as a safety precaution, as fuel pumps get old they start to flow less than optimally - at worst a dead pump under load can mean a dead engine.

Usual price on these is regularly $200, so if he is able to get them for $160 for 10 that is a good price..

AND (still interested) :mad:

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share




  • Similar Content

  • Latest Posts

    • Go to SP mufflers and get the muffler of size you want and make a nice mid muffler. It's about that simple! I have 2x 3.5 Magnaflow straight through Mufflers and while it's pretty loud with the Varex open, it's quiet enough with the Varex closed. You can also buy off the shelf Magnaflow straight through mufflers as well. You also have a turbo to quiet the car down too. Don't overthink it. Buy my extra Magnaflow muffler sitting on a shelf doing nothing (buy it new, ignore this part)
    • Centre-offset muffler under the floor, same as stock. Just....3.5". The change from straight pipe there to centre-offset will mean that you need to remake some of the pipe (add a bend or two).
    • Hey guys. So my R34 GTT has a custom 3.5” exhaust (done by previous owner) with a high flowing cat, and then just a Varex cannon muffler on the back. The car does drone alot and is really loud even on highway driving just cruising, as you can imagine due to the Varex muffler basically being a straight through with the valve open. As much as i love a loud RB, it can be a bit much with no other muffling in line and just driving casually. I wanted to lower the volume output on the exhaust a bit, as well as remove the drone (probably a way to do both at once), and was going to do it all myself as I am a fabricator and have done exhaust work in the past, so the fab work isnt my issue, im just not sure on the right product or type of product to use to get the job done, and i doubt an exhaust shop would be wanting to help me as they wont be making any money from helping me, unless they supplied the product? Anyway any help or guidance in best way to approach this would be awesome   Thanks in advance
    • Meh, whilst the Honda is a "really" good car and has potential if you want to drop coin on, it was uninspiring for me to look at, but, it did serve its purpose and is now in the boys hands, his happy, his girl is happy, as she wasn't to keen on the noisy old Patrol, and most importantly, the Minister for War and Finances is extremely happy that her "little baby boy" (6'2 nugget who is currently training to be a copper, which will make 3 coppers in the immediate "circle of trust") has a well sorted reliable car that doesn't guzzle diesel Me, I'm more than happy with the NC MX5 that I replaced it with, it's a fun little car that I like looking at, like driving, and yes..... I do like the fact that the maintenance and modifications that I have done/will do are plentiful and relatively cheap, well........ while staying naturally aspirated slow that is, and that's all I really need for a fun little daily, I can rev the 5hit out of it rowing through the gears and never really break the speed limit  In saying that wicked word, "modifications", I've already ordered something for some noise and an additional "3 ish" horse powers, or whatever it gives, in the form of a header, and, a new set of "cheapo" BC coilovers that are already sitting in the shed waiting to get put in, I had the same BC's in my old NB and found they were fine for the street, hwy, and the occasional track days I did in it, they have 6kg front and 4kg rear springs which is about 10% stiffer than the stock springs which I found worked well for their price  I've also already been in touch with MX5 Mania in Dural, so once the header is on it will get a ECUTek RaceROM tune there (I cannot rev match for 5hit, and I loved the RaceROM rev match and FFS in my old 86 "RIP") In other, maintenance news, I put some new sparkler plugs in it, and have a new set of DBA Street series pads to put in over the next day or so, I'm running the DBA street series in the SS and Honda and really like them, they work great and are not dusty at all I've also booked in a few days leave over this weekend to give me 4 days weekend do some paint correction and give the leather seats some conditioning and interior some Bissell and steam cleaning OCD lovin', the carpet and interior looks clean, but from my experience with the Bissell IRT carpet, and the steam cleaner IRT trim, looks can be deceiving I've also found that finding a detachable hard top is proving problematic, the main reason why I didn't like the NC initially was the power retractable hard top that I seen them with gave the roof line a weird look, the detachable roof though looks good, and is a same shape as a NA/NB hard top, similar, but unfortunately not the same as it has different fixture point on the front, so fitting a easy to get NA/NB detachable hard top is no bueno New Old cars are fun, cleaning, hunting and playing around brings much joy How are your beasties going? Do you still have the Skyline with the LS???, or Barra??? that you were playing with
×
×
  • Create New...