Jump to content
SAU Community

Recommended Posts

well, im importing a 300ZX next year, and i think that if you can find a decent one private sale, get it. Then you dont have to go through all the bul*shit on getting ready for road. Its a hell of alot cheaper importing, but do you really know what you are getting?

who are you planing on importing with, ive been reading up on prestige motorsports, and they seem to have the best to offer. and yeh thats y im importing becasue i cant really afford to buy one in australia becuase there so hard to find for a good price..u know wat i mean...but yeh if i do find one private sale then i will buy it.... wat do u think?

im importing a 300ZX next year, and i think that if you can find a decent one private sale, get it. Then you dont have to go through all the bul*shit on getting ready for road. Its a hell of alot cheaper importing, but do you really know what you are getting?

guys just a quick word. I've seen the prices of '89 R32 GTS-T's go sky high because everyone wants a 15yr import atm. For about $11500, those cars are an absolute rip-off IMHO.

I know cause I used to own a immac '93 GTS-T TypeM, leather seats, GTR interior, nothing broken, tired, worn etc 18" rims, adj susp bushes, etc etc and that sold for not too far off what the on-road costs for one of these ordinary to say the least condition '89 GTS-T's are going for

nah mate, it was 12-18 months ago.. prices have shot up on the newer r32 models, simply because of the 89 models.. its actually the reverse everybody was whinging about when they were eligible! that they'd drive the price down of their cars.

I have no idea whether the prices being asked are being met out there, but most seem to be asking around $15k

I remember regularly you really couldn't find an R32 for much over $15k, and fairly modded ones went for 12-13k.. and this wasn't that long ago.

Import, you can't really go wrong.. engines are replaceable, paintjobs are re-doable.. and $3-5k difference will buy you a bit of things to be fixed (if needed).

My 89 is getting an RB25det, and conversion to rb25 box, and an intercooler, maybe even a seat retrim, and few other extras for under the price I can see up forsale recently.

but why would that happen? Because in comparison to all the 89's the 90's are rare?

Demand for *Cheap* Skylines, Silvias, zx's, etc increases dramatically becuase of the import rule. Basic laws of demand and supply says that an increase in demand will precursor an increase in price (And often supply)... Only problem now is that the gumminint is considering removing the rule, or changing the time frame, so that it is not 15 years, rather it is anything before 1989.

if u r gonna get one under the 15 year rule, do it now.

This isn't exactly news, but DOTARS have told the major Australian agents (such as www.prestigemotorsport.com.au and www.j-spec.com.au) that there may be changes to the 15 year import rule come January. They have also been told not to buy-up on cars built in 1990.

I just bought a November 1989 R32 GTS-t Type M 4 Door, the landed estimate is around $7,800 (it will actually be a bit less, because i bought it when the dollar was up against the yen)

2 door ones tend to be $1k or $2k higher, but it depends on the condition. If you're after an automatic, prices are much cheaper than the manuals.

Check out the above two websites, as they have heaps of R32s in stock at the moment, and you're sure to find one that matches your tastes.

thanks guys... i was under the impression that the price of 89gtst's where dropping quite a bit (to import from jp). What i am trying to work out is.. should i buy know under the 15yr rule while it is still around OR should i buy late next year early 06 when i originally planned to and hope that depreciation will take the price down some more..

it all depends on what's going to happen with the 15yr rule.. as the details are still pretty vauge... so i don't know if it will be possible to import under the 15yr rule, it might work out cheaper to actually import under SEVS where i can't do the compliance work myself...

personally i would rather buy later on as i don't have the money now (i could possibly scrape it together in a really big effort... but not going to be very easy at all) i might not even save my self any money by getting in early. I don't mind paying a little bit more for the convienice of buying when i want to, but at the same time i don't want importing to cost an arm and leg...

but DOTARS probably won't tell us the specific detail until 2seconds before the rules are applied, so i probably won't have the time to make an informed decision.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Photo of manifold showing gate location? I mean, it's 6Boost, so we probably shouldn't be worrying, but always wroth knowing what the layout is. Plumbed back to atmosphere? Or into the dump?
    • Yes correct. Also, I'd avoid applying it to soft paint (however I doubt you'll ever have to deal with it in practice). So any paint that hasn't fully hardened, could be a 1k paint that never fully hardened or it could be a 2k paint that was laid down thick and hasn't yet fully hardened. 
    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
×
×
  • Create New...