Jump to content
SAU Community

Recommended Posts

Inasnt did spin. I might have a rb26 but it only has 211rwkw and crap tyres, nearly no brakes on the last lap and kyb street shocks with a blown rear with no other suspension mods so I think 1.31.86 on the last lap is a pretty good time considering geoff managed a 1.31.60. The one under geoff on the time sheet.

Good times mate. I know the feeling with the crap shocks, mine are stock and the RR is shot so the car is somewhat underdamped. Makes it tricky. I felt I would have done a 1:30.xx had I not had to contend with the tools in the TVR and the BMW M3, who I gave 100m onto the main straight and the wanker held the inside line into turn one. Competely wasted the session. Can't wait for the opportunity to get decent coilovers.

  • Replies 138
  • Created
  • Last Reply

Top Posters In This Topic

contend with the tools in the TVR and the BMW M3, who I gave 100m onto the main straight and the wanker held the inside line into turn one. Competely wasted the session

The attitude of these types of people are, "I have the cash, will do what I like in my new M3 (b/c an M3 makes me an excellent driver), screw you and the fact that you're faster".

Tools :whip:

As a result of these fools I didn't get one flying lap in that last session :D

The attitude of these types of people are, "I have the cash, will do what I like in my new M3 (b/c an M3 makes me an excellent driver), screw you and the fact that you're faster".

I expect it is more a case of 100% concentration on getting their car around the track so no idea what is going on behind them. Trust me, this attitude has nothing to do with the car, it is just that those cars were fast enough for it to be a problem for you.

Even F1 drivers have the same problem. But the fact is, if you want clear laps you make them yourself if the other people are not coming to the party. Slow down on the back straight or somewhere that won't affect your laptime and make enough space so that you will not catch up with them. You had three flying laps to sort it out...

It is exactly the same problem you get on the Great Ocean Road etc...

I expect it is more a case of 100% concentration on getting their car around the track so no idea what is going on behind them. Trust me, this attitude has nothing to do with the car, it is just that those cars were fast enough for it to be a problem for you.

But the fact is, if you want clear laps you make them yourself if the other people are not coming to the party. Slow down on the back straight or somewhere that won't affect your laptime and make enough space so that you will not catch up with them. You had three flying laps to sort it out...

It is exactly the same problem you get on the Great Ocean Road etc...

yeah, maybe the case... might have jumped down their throats abit, but it is still a common courtesy to let the faster cars through. At one point the TVR had three cars in tow...

I did end up waiting at the back straight for 1/4 lap to try and clear them, but was too late and didn't get a full flying timed lap :D

Yeah 100% with you on that, they should let the faster cars past.

Though that does mean that they have to wreck their flying laps too.

I used to always try and go out last in the session and wait as long as possible on the warm up lap. Then unless there was a very big speed difference I used to always get a clear run. The problem you had happened too often for me to try any more and there are always trackday n00bs.

No the sessions were based on expected lap times and colour coded, so what were they doing going that slow. It was all I could do not to shove through on the corners but we all agree to be polite and give way. I pulled almost the full length of the front straight on the TVR before Dandenong corner on the first lap and that is just criminal as 2 others were in front of me. I told the guy in the TVR if straight line speed was all he wanted, go annoy a drag strip.

His excuse was we weren't trying hard enough to pass and weren't close enough so he didn't give way. On top of it all the flaggies let him continue his crap.

His excuse was we weren't trying hard enough to pass and weren't close enough so he didn't give way. On top of it all the flaggies let him continue his crap.

Not close enough????

I almost tonked him about 5 times through the corners - I was seriously standing on the brakes not to rear end him b/c his braking points were so early!!!

I was actually starting to back off because I was worried that I would get too excited around a corner and collect his slow-arse back end... :Paranoid:

Ok back to the photo's :)

Here are some my friend took with a slr but i had to drop the size down alot to make them a reasonable size

http://www.skylinesaustralia.com/photopost...ll/ppuser/11694

On every session I had to overtake most of the cars in my group like the escort, 260z, mx5, celica and that old jag, but most times i approached them near the straights and they waved me past but still slowed me down a bit through the corner and ontop the straights.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...