Jump to content
SAU Community

Problems with importing...

insanenissan
 Share

Recommended Posts

insanenissan Contributor

insanenissan

Posted
Posted

Im now thinking of importin the good ol r32 gtst.

Now, what are the main problems with importing? How do you really know you are not getting a piece of sh*t that some jap has absolutely flogged! Because the thing i dont wanna do, is import one drive it for a while then have to get a engine rebuild... new transmision... turbo rebore or whatever it is.

So how can you make sure you get a good car? With many importing places you see the car in a photo and have to choose within a few hours wether you want it or not. So you really dont know what you are paying pretty high cash for do ya?

Some one help me out before i make a decision.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/54924-problems-with-importing/
Share on other sites
RiverSide Proficient

RiverSide

Posted
Posted

Unfortunately there is of course an inherant risk involved with importing, it is for this very reason that impoting is not for everyone. Not everyone is happy to purchase with only a description and a few pictures.

If you are extremely concerned about this then i suggest you have a look around locally in dealers yards and privately, this will allow you to touch/drive the vehicle and have it checked out by your family mechanic.

You may well pay a tad more by purchasing locally, but if you feel more comfortable doing so then it is money well spent.

slow13dude Rising Star

slow13dude

Posted
Posted

I'd nominate two considerations:

1. Find someone you trust to examine the cars. I'm importing through Prestigemotorsport and Geoff has warned me off several cars that pop up at auction because they're dodge.

2. Look for the auction grade. If it's a grade 4 then it's pretty good all-round. If you see the auction sheet and there's xxxx everywhere then you're rolling the dice.

linxus40 Community Regular

linxus40

Posted
Posted

when i imported i went throug j-spec.com.au. better to get an angent that has people to check the cars out in japan and better to avoid the only 1 day to buy bs as there is no need to rush. get them to get a mechanic to fully check the car out (will cost you about $250) but you will get a full report as well as about 80odd photos. put ya deposit down so they start looking for ya but take ya time and dont take the first car ya see, wati till ya get a feel for the types of cars that are avaliable.

i did it this way and my machine is a rocket with no problems whatsoever.

wises Enthusiast

wises

Posted
Posted

on the other hand, i bought my 89 gtst through prestige, looked awsome in the pics, and the condition notes said all was good. HA HA heres the kick in the teeth, i went to collect the car to see it with bald tyres, missing an indicater (found in the boot), parker lights not working, no water, crack in the front bar (not in pics, i looked) and a terrible miss in the engine. after later examining the car found it was pissing water out of the head gasket staight onto the turbo cracking it (still waiting for replacemnet), im a happy person so i still love my car i just wouldve rathered not go through all this stuff.

WHEN i do it again, i will be getting a under 15 year old car through sevs, i think it takes alot of the aingst out of it and at least a grade 4 auction value

predator Grand Master

predator

Posted
Posted

depends what u want.. if you are getting a cheap car, you have to expect to have to do some work on it. I don't mind working on a car to fix little problems, I just see it as a challenge and part of the fun :)

If something is perfect it can only go down hill, whereas if something needs a little TLC you can only be happy with every little thing you do to it. My thoughts anyhow!

  • 3 weeks later...
MRK25T Experienced

MRK25T

Posted
Posted
depends what u want.. if you are getting a cheap car, you have to expect to have to do some work on it. I don't mind working on a car to fix little problems, I just see it as a challenge and part of the fun :)  

If something is perfect it can only go down hill, whereas if something needs a little TLC you can only be happy with every little thing you do to it. My thoughts anyhow!

His car would have been checked over by the guy in Japan and pictures sent. It is the fault of the guy checking the cars in Japan if he missed obvious problems.

redline2003 Community Regular

redline2003

Posted
Posted

So say if i were to import through prestige, would they be able to take the car i wish to buy to get it checked for accidents/compression/faults/etc, before i hand over the rest of the cash? Because i cant just buy a car by looking at auction sheets, if i cant feel or drive it, i at least need some checks done...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      GTR R34 Limp Mode

      By GTSBoy · Posted

      Has equal chance of cleaning an AFM and f**king an AFM. I think you can work out what happened. When the Hitachi ECU sees the AFM die and goes into the associated limp mode, then it will start and run just fine, because it ignores the AFM and just runs on idle maps that will do what it needs to get it going. But there is no proper load signal, so that's about all it can do. My suggestion? If you don't want to go full aftermaket ECU, then get some R35 GTR AFM cards and some housings to put them in, in the stock location, and Nistune the ECU. Better to do a good upgrade than just replace shitty 40 year old tech with the same 40 year old tech.
    • steven7270
      GTR R34 Limp Mode

      By steven7270 · Posted

      So my car was recently having trouble starting on initial crank, I would need to feather the gas for it to start up but besides that it would start and run fine. So I clicked the idle air control valve (with throttle body cleaner) and cleaned the MAF sensors (with MAF cleaner). The start up issue was fixed and now the car turns over without the assist of the throttle, but the car is in limp mode and wont rev past 2.5k RPM. From what I understand the IACV would not put the car in limp mode, so I am to believe it is the MAF sensors, but it was running fine before and now I cant get it out of limp mode. I cleaned the MAF made sure the o rings were seated properly. Made sure the cables were plugged in properly, the cables also both read the same voltage. Does anybody know why this is or what could be causing this or how to get it out of limp mode?
    • Dose Pipe Sutututu
      SAUNSW - Cruise - Albion Park Aviation Museum - 9th August

      By Dose Pipe Sutututu · Posted

      Ooo I might actually come and bring the kids, however will leave the shit box home and take the daily
    • PranK
      Rusty roof repair

      By PranK · Posted

      Thanks. Yeah I realised that there's no way I'd be able to cover the holes with the filler, it would just fall through. Thanks again @GTSBoy!
    • GTSBoy
      Rusty roof repair

      By GTSBoy · Posted

      That was the reason I asked. If you were going to be fully bodge spec, then that type of filler is the extreme bodge way to fill a large gap. But seeing as you're going to use glass sheet, I would only use that fibre reinforced filler if there are places that need a "bit more" after you've finished laying in the sheet. Which, ideally, you wouldn't. You might use a blob of it underneath the sheet, if you need to provide some support from under to keep the level of your sheet repair up as high as it needs to be, to minimise the amount of filler you need on top. Even though you're going bodge spec here, using glass instead of metal, the same rules apply wrt not having half inch deep filler on the top of the repair. Thick filler always ends up shitting the bed earlier than thin filler.
×
×
  • Create New...