Jump to content
SAU Community

Recommended Posts

Hi everyone,

Been a while since I have been on the forums,

But unfortunately today I was stickered for my headunit. Yes, believe it or not but this is true.

I don't really want to go into the details but they overlooked some little things such as the cam gear cover on the front of the motor which has been removed (they didn't say anything about it). However, as I need to go over the pits, I am just trying to source a cam gear cover for an RB26, just in case it is required in order to pass.

Does anyone have one of these?

Any help is greatly appreciated.

Thanks

Dan

Link to comment
https://www.sau.com.au/forums/topic/55085-copped-a-nice-yellow-sticker-today/
Share on other sites

i got yellowed also

need a 3 inch cat dudes to borrow , same deal , lemme know if you got one :D

Are you running standard brakes? if so would that pass?

Did anyone get done on Wanneroo road when there was that 'blitz' with all cars regos checked etc, apparantly about 120 (might have been 170) yellow stickers given out over 4 hours. I probably would have got one if I as going that way (was going in the opposite direction) as my exhaust is being held on by coathangers at the moment... (all getting fixed tomorrow)

What I heard today with yellow stickers (dont know if its true or not) but depending on the angle of the sticker depends on the severity of how badly the pit inspectors will rape you. For instance, a straight sticker says "This guy is alright, dont give him a hard time", a wonly angle is "Find as many faults on this wanker as possible" and upside down is a "Do not pass whatsoever."

I wonder how true this is, cos I've never heard of a cop putting a sticker on upside down.

its all true the further the sticker is from straight the worse the cop thought of you but the pit boys dont always go for it my mate got 3 stickers in 1 month all on nasty angles by the 3rd the pit boys sed tell the cop to go jump this car is perfect and didn even check it

it is true folks about the angle of the yellow sticker. If you cop one get your car home ASAP wet the sticker and make it straight.. Believe me it works

It used to be that if you gave the cop a bit of shit for giving you a sticker, they would put it horizontally on the windshield, which told the inspector at the pits to go right thru' your car and find everything possible for you to get fixed. Basically to give you a hard time.

Yeah, it was common to steam the sticker and set it vertically, that way the inspector was oblivious to the goings on at the time the sticker was issued.

Occasionally, we took a gamble and removed the sticker and hoped like hell that the cop didn't follow it up. You could be garanteed that the cop would follow it up if you had given him a hard time. These days, I'd say that everything is entered into the computers, so licensing will always know that yellows have been issued.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...