Jump to content
SAU Community

Recommended Posts

hey guys, probably heard all this shit b4

have stock r33 gtst 1993

i have started a list of the stuff im doin to the car

for pullin 12's. it will be over most probably 6 months/12months

exotic exhaust ( sumner park)

dump pipe with wastegate screamer

400 bucks

intercooler kit ( slacks creek)

hardcore racing components

1550 bucks

greddy turbo timer & speed meter

150 bucks

boost controller

(unknown brand)

unknown price

just a question for you guys that have been down this

path or similar, what steps should i be taking next

and if you could list the price and best place around brisbane

to get it fitted, or if i could do it myself

myself i was thinkin bout management system

a power fc

turbo

injectors

with the stock auto box would it be able to handle the power

would i have to get it rebuilt?

any info for this would be good and much appreciated.

baz! :alcoholic

Link to comment
https://www.sau.com.au/forums/topic/55157-taking-steps-for-street-racerdrift/
Share on other sites

Ok to get into the 12's you will most likly need to change the stock turbo.

I would go like this

exhuast + dump + front pipe (no need for screamer)

Air filter ($100 K&N)

FMIC (hybird 600x300x76 $400-$500 + piping)

Greddy Plenum (option really, just cut down on piping and is only good if ur aiming for higher power lvls $1200)

Ecu (power fc, wolf3d, motec etc, depending on the tuners in ur area will depend on what u get really if you have a good pfc tuner i would take that over an average wolf tuner) (PFC should cost you around $1300 inc hc)

EBC (apexi, hks,greddy price $500-$800)

Turbo i would go HKS GT25 (or highflow stock turbo) both i have seen good results and making a r33 run 12's :D

injectors i belived 550 would be the best for the power you would be aiming for

Just something to think about i have been told that pushing as stock r33 engine over the 300rwhp becomes risky and can results in damaging the engine really easy. Also you will be clutch and stock upgrade, and also bigger tyres than stock to make it easyer to get traction

thats all i got for now, hope it helps.

Ohh yeah 12's isnt easy, drag racing isnt easy ;) i ran a best @ 14.3 with 170rwhp (est i would say be around that mark) i could do better now the car is runing better etc, but getting the power to the ground is always the problem.

Autobox i would add cooler on it, do a serach heaps of info on r33 auto boxs.

ohh yeah and if u are using an r33 for drift, u need a 5spd auto wont cut it :P

mike :)

2rismo can run 12.9's before he hits the bottle, and i heard him say the record for stock turbo was around 12.7......quite possible depending on the condition of the car.

I can run a 13.4 using only cat back zorst and boost with crap tyres, but i might just be special lol

yeah sweet as, sounds good

thanks for all your answers,

will be doin most of the things you's have listed when

i get the money, i have a car im sellin

just a gemini thats been worked abit did high 15's in it

with a .8 start

so soon as i sell that i'll be onto the start of mods

thanks for all the help again

and you'll hear about it when i have done it.

Isn't "Drags" racing?  

Havn't u anything better to do circuit boy? got a chicane to go thru or sumthin? Haha :D

;) :upurs:

and I thought Pizza boy was racing for Williams in F1?

No such thing as street racing on SAU :D

i was just sayin "12's" as thats how fast i want the car to go

just givin you guys a figure, so ya know how fast i was talkin about.

sorry bout that, but yeah once i get most of the stuff done

i'll let yas know, and im for sure know will be askin for advice and whateva along the way

if some of yas are goin on the cruise on the 28th i'll see yas there .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
×
×
  • Create New...