Jump to content
SAU Community

***CANCELLED***Eastern creek Twilight Drive Evening 19/11/04


Recommended Posts

From http://www.eastern-creek-raceway.com/ :

NO SPEED LIMIT TWILIGHT DRIVE NIGHTS are being conducted at Eastern Creek Raceway from 5pm till 8pm on the Friday evenings of November 19, December 10, 2004 and in the New Year, on January 21, 2005.

Responsible enthusiasts now have the opportunity to enjoy the power of their cars in a safe controlled environment. Drivers must hold a full drivers licence (no P plates) and be over 18 years of age, cars must be registered and road worthy. A limit of thirty cars are on track in each 20-minute session. Drivers get a minimum of 3 x 20 minute sessions.

Overtaking is only permitted on the main straight.

At sign on, drivers are issued with a set of rules and regulations.

Booking Are Essential - download booking form here

What: No Speed Limit Twilight Drive Nights

When: 5pm Friday 19 November 2004

5pm Friday 10 December 2004

5pm Friday 21 January 2005

Where: Eastern Creek Raceway

Cost per Night: $75 (Incl GST) Non CAMS Licence.

$55 (Incl. GST) CAMS Licence.

Regulations:

* Drivers must be at least 18 years of age and require Full Drivers Licence (no P plates)

* Cars must be registered and road worthy

* Approved crash helmet must be worn along with a non-synthetic long sleeve shirt, long pants and enclosed shoes.

* An indemnity document is to be signed.

* Licences and Registration stickers must be sited on the night.

LIMITED NUMBERS AVAILABLE – Bookings are essential

go to the website and find the Twilight Drive link

At this stage I will be there

:)

Attending:

me (Dino)

OZ GTR97V2 (Paul)

4DoorGTR (Mal)

sounds like it would be a phat night ! are you allowed a passenger?

Unlikely I think, but give them a call to check.

Just a reminder that yoiu have to d/l the form and send it off to secure a spot. :D

There if the Zed is not in getting fixed : (

sheesh Kel, get your prioirites right...track day with street cred damaged Z or sipping lattes while admiring your pooncy unblemished hairdresser car :D

sheesh Kel, get your prioirites right...track day with street cred damaged Z or sipping lattes while admiring your pooncy unblemished hairdresser car ;)

I'd settle for the cred- all I seem to get atm is the 'stupid woman driver' looks!

:rolleyes:

HMmmm might come. All getting the slot car set up for drags for the off season as gets a bit hot this time of year and they go and do a arvo evening cooler time of day thing which opens the door again.

I have sent my application away but I have not had any responce as yet. Looking forward to seeing what the new toy can do, even if it is STD. I might have some issues getting away from work on time so I might be running a little late, should be there by 5.30-6pm.



  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...