Jump to content
SAU Community

Recommended Posts

Well after trying to fix my coils with coating the clear part of the coil with silicon, it did fix it somewhat with no mid range misses. So ive upped the boost and seem to get a few other problems , but thats another story.

I decided to leave the coil cover off, and when i got home in darkness had a look underneath for spark. And to my discovery, ive saw lightning on about 4 coils. Will check it again tomorrow night for a better check.

Looks like im up for a new set.

Link to comment
https://www.sau.com.au/forums/topic/55918-coils-lightning-at-night/
Share on other sites

use some Co-Contact cleaner. I was thinking of the same idea about the silcone coating but never did it. My gts-t and GTR did it but just spray them off with the co-contect cleaner and maybe use a soft cloth that should stop the tracking should stop the coil shorting to earth.

you covered the wrong part of the coil.

 the clear part never cracks AFAIK.

 It is the side opposite to the clear part that cracks.

 

these photo's from a thread I posted show where they usually crack.

 

attachment.php?attachmentid=22611

 

attachment.php?attachmentid=22612

I couldnt find any cracks on the body of the coil as shown in your pic. I found a few little marks on the clear part though. If thats the case i pull them out one by one and try and fix them. Its annoying

Cool...i saw the same thing in the movie Wraith. If its good enough for Charlie Sheen its good enough for me.  :cheers:

So they can get that bad can they?

off topic but

havent watched the movie for a while but what was the car i cant remember?

arent u supposed to earth them somehow b4 u uncover??

maybe bull shit to get more $$ outta me iono

but so much coil talk i posted a pic

THIS A F**D COIL if your looks da same time for new ones

sparks jumpin from coil to coil not goin threw them to the plugs

see da white shit were it looks melted

I had a look last night in the dark. There were at least 4 coils that where lightning up at idle. To my amazement i can still see no cracks. I can see some burnt marks on the side of the coil however, so ive put a bit of araldite on it for some sealent. I will put them back on tonight too see if its worked.

all my coil packs glow blue when you look down the gaps around them. but my car doesnt miss????

has anyone ealse got there coil cover off. have a look at night and tell me if you can see a flickering glow. my car seems to be a little down on power when compared to other cars with the same set up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How much have you lowered?  I had 350Z springs in the rear and was able to pull the camber into factory spec with the factory arms on the rear, obviously the front ran negative camber as it isn't adjustable, but rotating the wheels regularly evened out the wear.
    • Either the installer needs to come back, you need an auto electrician, or you need to learn automotive electricals yourself.   First step Id look at is where that big thing came out of, is there still things unplugged at that location? Maybe they just forgot to put a relay in or something?
    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
×
×
  • Create New...