Jump to content
SAU Community

Recommended Posts

sometimes i think we should have more rights as motorists when it comes to being pulled over for a "random checkup"

i bet about 5 rusty old fords with drum brakes all round went past and he didnt even batter an eyelid.

dude u are right there, althought (touch wood) i havent been pulled over from what i hear it would be nice to have more rights...

i saw this VL driving around had no back window total rust bucket was supprised it was even driving exhaust about to fall off and he went straight past a cop and as you said mate "didnt even batter an eyelid."

The only advantage of not having my line on the road for the last year is becoming apparent.

Dont know how he did not get you for that anti revenue raising front plate tucked under the front driverside bumper.

Why not put it in front of the FMIC on a loose door hinge at the top so the faster you go it just tucks back under without obstructing air flow :P

Why not put it in front of the FMIC on a loose door hinge at the top so the faster you go it just tucks back under without obstructing air flow :D

I busted the bolts that hold the centre bracket in the threads... and haven't got any easy-outs yet so can't bolt anything back there :Oops:

I got pulled over at about 11:45 on Wednesday night, for a random breath and license/reg check. I was a tad concerned that I was going to get a canary for the 13" steering wheel and harness I had in my car. And the fact that I didn’t clear the EPA notice, for the BOV. He didn’t even ask to look under the bonnet. Nice bloke, polite, and even laugh at a funny I cracked!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...