Jump to content
SAU Community

R31 turbo conversion parts [goldcoast]

predator
 Share

Recommended Posts

predator Grand Master

predator

Posted
Posted

Decided I'm no longer going to turbo my R31, and instead put the money to better use on my other car. So have all the following VL Turbo parts available.. most of them are all that is required for a turbo conversion on rb30e.

Not very negotiable on prices, as I know these can be difficult to track down, and it took me a while.

$150 RB30ET std. injectors

$150 RB30ET auto ecu (will work in manual fine)

$200 RB30ET manifold

$100 RB20DET piping + stock intercooler

These will be useful if you're going to use a stock VL T3 turbo:

$70 RB30ET Crossover

$60 RB30E cast dump pipe from turbo.

Strap these to an RB30E and push 130rwkw+ in your R31.. A nice match for any stock R32 or R32

All are in VGC. Can provide photos if you are really interested.

Number is 0417 016 326..

Link to comment
https://www.sau.com.au/forums/topic/56630-r31-turbo-conversion-parts-goldcoast/
Share on other sites
  • 3 weeks later...
Ghostrider Grand Master

Ghostrider

Posted
Posted
Decided I'm no longer going to turbo my R31, and instead put the money to better use on my other car. So have all the following VL Turbo parts available.. most of them are all that is required for a turbo conversion on rb30e.  

Not very negotiable on prices, as I know these can be difficult to track down, and it took me a while.  

$150 RB30ET std. injectors  

$150 RB30ET auto ecu (will work in manual fine)

$200 RB30ET manifold

$100 RB20DET piping + stock intercooler

These will be useful if you're going to use a stock VL T3 turbo:

$70 RB30ET Crossover

$60 RB30E cast dump pipe from turbo.  

Strap these to an RB30E and push 130rwkw+ in your R31.. A nice match for any stock R32 or R32

All are in VGC. Can provide photos if you are really interested.

Number is 0417 016 326..

Please advise this dumb ass old fart how you get 130rwkw strapping on all the VL turbo bits when the VL turbo was only rated at 150Kw from the factory.

It is my understanding that a loss of between 20 & 30% was expected to be lost through the drive train.

This would result at the absolute best 120, but more likely 100-105rwkw.

Cheers.

StockyMcStock Proficient

StockyMcStock

Posted
Posted

higher compression in the RB30E vs ET - keep the boost about 7-9 psi and you will make 130 easily. it's only 160-170 at the flywheel, not that much really.

there is another, different way to make 130rwkw on an RB30E, that is exactly my power output and i am pushing a whopping 3psi. can you figure it out?

Ghostrider Grand Master

Ghostrider

Posted
Posted

A bit off the track for a moment, but I have an MR30 Hatch, L24E with 8.5:1 comp, planning to transfer all my HR30 turbo bits onto it, including stock ECU or go with a Microtech piggy back system on original L24E ECU.

If non intercooled, how high can the boost be and am I going to benefit by fitting a bigger T03 turbo.

The L20ET engine has an T03 but only .47 rear housing, yet I have a T03 from an FJ20 that is identical other than a .87 rear housing.

Is the L24ET going to benefit by the larger turbo?

predator Grand Master

predator

Posted
  • Author
Posted

er this is not really the place for turbo discussion.. I don't want to be drawn into a why or why not.. but it is fairly common.

back on topic: all of the above is sold except the crossover and the intercooler.

  • 1 month later...
Lithium Grand Master

Lithium

Posted
Posted

I have ended up with effectively a VL Turbo which I need running on my R33 Skyline ASAP, and its designed to have the wastegate in the dump pipe. I take it you have sold the dump pipe?

Richard Everett Contributor

Richard Everett

Posted
Posted

Hi Stocky,

You did not open up as to how you got 130 rwkw on a RB30e at 3 psi boost?

Can only assume you are using some sort of supercharger?

For us 'dummies' please tell all - as 80 rwkw in NA form is what I have now & the attraction of a 60+% increase without going turbo is intriguing!

Cheers,

Richard

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • DraftySquash
      Newbie from VIC

      By DraftySquash · Posted

      Just wanted to unearth this and post my baby with the new front ❤️😝 Took her to my wedding rehearsal today. Next up is getting wide skirts (after wedding)
    • Kinkstaah
      Nismo GT Pro LSD configurations

      By Kinkstaah · Posted

      Yea, that is what I was getting at in my ramblings too. The nismo one actually is a 1.5 way and a 1 way. They don't do a *2* way because a true *2* way would have equal ramp angles. Or is that a true 1.5 way? Realistically I think a "1.5 way" does not actually exist. A diff can either lock in two directions or one. It also doesn't help that a LOT of people in Australia speak about 1.5 way diffs are referring to their 1 way diff.
    • GTSBoy
      Nismo GT Pro LSD configurations

      By GTSBoy · Posted

      Well, the trouble with that ^^ is: The configuration shown is absolutely a 1-way, not a 1.5-way. There is no way that a 1.5-way can be said to offer LSD action only on acceleration. If Nismo cannot get that right, then it is impossible to believe their documentation. That ^ is not a 1.5 way setup. That is a 1-way.   And so now I have allowed all doubts to flourish and have gone back to look at the MotoIQ video. I originally made the mistake of believing him when he said "this is a 1.5-way" at the ~6:10 mark. Because what he did was take the gear assembly out of the 2-way opening and just rotate it one place to the left to drop it into the 1-way opening. When he dropped it in there, the cam was "backwards" compared to the correct orientation shown in all other photos of that config. The flat shold have been facing the 1° ramp side of the opening, not the 55° ramp side. And I thought, "gee that's cute", but I was concerned at the time, when he put the other ring back on, that the gap between the rings looked like it was wider then in the 2-way config. And then I said a lot of things in my long post on Tuesday that could only make sense if the guy from MotoIQ was correct about what he'd done. BUT... I have now done my homework. I grabbed a frame of the video with the 2-way config, and then grabbed another with the "1.5-way" config, snipped out the cam and opening of that frame and just pasted it direct on top of the 2-way config. I scaled it so that the triangular opening was almost exactly the same height in both. AND.... the gap between the plates is wider with the cam installed in the triangualr opening backwards. That is.... it cannot go together that way. There would be massive force on the plates all the time, if you could even reassemble it.  So, My statement on the matter? The Nismo diff is actually only a 2-way and 1-way. There is no 1.5-way option in it, regardless of what they say. Here's a photo of a real 1.5-way ramp opening from Cusco (along with the 1 way option). And the full set of 1 through 2 way options from their racing diff, which is not same-same as what we'd typically be using, but...the cams work the same. A little blurry, but it comes from this Cusco doc, which is quite helpful. AND.... Cusco do in fact do what I suggested would be sensible, which is to have rings that do 1 and 1.5, and 1.5 and 2. Separately.  
    • PranK
      Hello sau 👋

      By PranK · Posted

      Welcome Adam. Car looks great!
    • Kinkstaah
      Nismo GT Pro LSD configurations

      By Kinkstaah · Posted

      "With a 1.5-WAY, the LSD is effective only during acceleration."
×
×
  • Create New...