Jump to content
SAU Community

Recommended Posts

Now i know that this topic has been done to death but i figure i might as well ask.

I looked down at the odo this mornin and low and behold its time for an oil change AGAIN.:eek: feels like i just did it last week.

So my question is basically this: do u think its completely nessacary to change the oil/filter every 5000ks or can u run it little longer depending on how u been treating it?

U know i value all opinions no mater how moronic they may seem:lol:

Link to comment
https://www.sau.com.au/forums/topic/5673-oil-change-intervals-opinions/
Share on other sites

Hehe well that goes with out saying doesnt it. Last time i asked an aunty this question she said "huh what doesnt the oil just top itself up?"

I come from a family of car abusers.

My bro got home this morn when i was just pulling out to go to work and he gets out of the car walks round the front and opens his bonnett and puts his radiator cap back on that he just found on the floor as he pulled up. Now call me ismail but i think he was driving all last nite with no radiator cap on and he fills it when its overheating with cold water and wonders y it pisses water all the time sheesh :eek: this is the guy that has cracked 2 head gaskets 1 in a merc and another in an eb falcon from the same thing , drving with no oil or water in the car . *sigh*

Im pretty fanatical about oil. I do mine every 2000kms of hard driving, or around 3000 of not so hard driving. But then i dont drive it that much, so can afford it easier :P

I do it for peace of mind more than anything. Just like to know that the engine always has clean fresh oil.. MMmmm.

:burnout: :burnout: :burnout: :burnout:

(Motul 6100 synthetic ~50-60 bucks for 5 litres i think. Have been using Purulator filters, but changing to the Hard Driver filters)

Own ure own company do ya;)

Every 2000ks, thats nutz!!, especially considering how much u pay for oil.

I drive mine to work and dont really have the second car luxury so alot of the ks are done in traffic on just cruzin.

So u change the filter with every oil change

Jebus Boostzor, you couldn't have changed oil more than 8wks ago, 5000k already. Too many aimless cruises, eh? :) Oh yeah, tell your brother he's an assclown for driving around without a radiator cap.

SLY33, could you tell us more about Purulator and Hard Driver filters, including price and any reasons why they may be better than genuine Nissan filters?

I can tell with my 32 that when it gets to around the 5000 km mark after a service it is a little harder to start when cold or warm and doesnt idle quite as nicely..

I change oil/oil filter/check fluids/clean air filter every 5,000...

Have to do my diff oil when i service it on the weekend as well...:)

I've done ~13,000 klms in a bit over 2.5yrs (the time I've owned the car) I've done 6 or so oil changes in this time!

I change my oil based on how I've used the car since the last change, or on time (months) If I changed it based on klms I wouldn't do many oil changes!

Excessive? Maybe? But I'm happy knowing fresh Motul 300V is doing its best :)

I'd say 5k/6months is a good guide in most cases. Turbo engines are very hard on oil.

Change the gearbox oil after every track day?! Jeebus!!!!!

Transmission oil is different to engine oil. Most of the contamination in engine oil comes from the partial burning of it, plus it gets mixed in with fuel etc, all of which end up breaking down the rest of it.

A gearbox is a sealed unit though, with no burning going on. It only wears out as the gears squish all the oil molecules together and they eventually get separated and they don't lubricate properly anymore. You do tend to get some metal particles in the box, but most of these settle down the bottom and aren't too much of a concern.

My gearbox had never had an oil change when I got the car at around 85000, so when I changed it there was a LOT of metal in it. And yet the box was good both before and after without too much of a concern. You're only getting a few shavings after a track run, if you're running a good quality transmission oil (eg Redline) then I don't see why you'd change it after every track day unless you were racing professionally or something and someone else was paying for your oil.

As for engine oil, I change it every 5000 just for simplicity's sake, but I pay attention to the colour. It should end up a sort of dark brown/gold colour when I change it, I never let it go completely black (which it usually does by 10000). As long as it still has some of the gold colour left in it, it's doing well over 90% of the work it was doing when it was fresh. With my current driving habits the oil so far is still fine and it's almost done 5000 since I got it.

A good quality filter is essential, never skimp on that. A good quality filter should last for 10000, but what you're more concerned about is the size of the particles it lets through even when it's brand new.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...