Jump to content
SAU Community

Recommended Posts

Well after paying for the car in late July, late November, and the car finally has been delivered today!! Was pretty exciting to see the car carrier come deliver it today direct to my door.

Still needs to go through compliance, most of which I'm going to do myself I think, so its going to be a few weeks before its on the road. I'm in no hurry though with xmas and things coming up.

Overall pretty happy with the condition. No rust, no signs of any major accident, and interior is pretty great condition throughout. Most things seem to work ok.

Started her up, and the ol' rb20det seems to run nicely and smoothly, with no major issues I can see so far. Unfortunately with no compliance yet, its not going anywhere much further than the driveway.

Needs a clean and general tidy up over the next few weeks.. and if I ever find out the #@$#@$#@ who decided to sticky tape up the bonnet they're in trouble! Because cloth tape is an absolute BITCH to remove! (any suggestions???)

Paint has a few minor scratches and things but for a car 15 years old, as good as you'd expect. Only disappointment I guess is looks as if something has rubbed against it, or even suspiciously looks like a key mark along the rear left quarter :cheers:.. that was never in the original condition report or photos :D

Sometime its going to need the bonnet redone (probably replaced with a GTR or CF job), and the rear side resprayed. Maybe even a full respray. But oh well, for the price I no complain.. few hundred bucks will fix all that some day. This car will never be about the looks anyhow..

For $7200 so far (yes, really, landed and to my door), you can't really complain

Link to comment
https://www.sau.com.au/forums/topic/56822-shes-here/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Thanks guys.. its not perfect as you can see, but that is part of the challenge and fun of building it up from stock into a beast exactly the way I want it :cheers:

I will try bigKev - hope it works.. I think because the bonnet latch needed bending back down (2 minute fix) they taped it all down.. *shrug* Its annoying whatever the reason!

RB25 is going in probably late jan. Its pretty much ready to go though and i have the loom, ecu, etc... no idea about that plenum mod, old owner said he had no problems (but was only running mild power levels). Harder to change than leave be unfortunately, so guess its staying. Goal is around 240-270rwkw once that goes in, so shall be interesting.

Yotis: if yours was on the same boat, it should be any day now. On the car carrier that came down here, there was another grey R32, so there are a few going through.

Link to comment
https://www.sau.com.au/forums/topic/56822-shes-here/#findComment-1099260
Share on other sites

hey i've seen that plenum mob before, it seems alot of people have it, anyways theres nothing wrong with it :cheers: and i'm sure its a little better than the standard crossover ...

can i ask? was that 7.2k landed for a manual? any other mods? is it possible to get one with rb25 already in there?

Link to comment
https://www.sau.com.au/forums/topic/56822-shes-here/#findComment-1099304
Share on other sites

was that stimp's old rb25 u got it there?

car looks great.. guess it won't be long before it is all fixed :cheers:

It looks like it's stimps' old RB25 cuz of the stuff (i forget what it was) that he coated the penum with....turned out that icky colour.

Good luck Gord with the 32. You got a good deal.

Scott

Link to comment
https://www.sau.com.au/forums/topic/56822-shes-here/#findComment-1099405
Share on other sites

hey gordo nice to see the wait is over & the car is here with no Big probs, as for taking the tape off try "Perp Wash" that should bring it off, if it dose make sure u use some paint cleaner after & then wax it.

As the name says its a prep wash for painting but is not to hard on the paint MAKE sure the car is parked in the shade & the paint is cool

Link to comment
https://www.sau.com.au/forums/topic/56822-shes-here/#findComment-1099493
Share on other sites

The tape must be the latest in Japanese rice.. I also have a bunch of receipts and a KFC receipt in Japanese, how exciting ;)

Will and Scott are on the money.. it *is* stimps old engine.. not the twin turbo one (i hope!) but the other one he had... I'm going to take those off at some point and get them polished or anodised.

Where do you get this purpsol or prepsol stuff?

Link to comment
https://www.sau.com.au/forums/topic/56822-shes-here/#findComment-1099531
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
×
×
  • Create New...