Jump to content
SAU Community

She's Here!

predator

By predator,
in Queensland

 Share

Recommended Posts

predator Grand Master

predator

Posted
Posted

Well after paying for the car in late July, late November, and the car finally has been delivered today!! Was pretty exciting to see the car carrier come deliver it today direct to my door.

Still needs to go through compliance, most of which I'm going to do myself I think, so its going to be a few weeks before its on the road. I'm in no hurry though with xmas and things coming up.

Overall pretty happy with the condition. No rust, no signs of any major accident, and interior is pretty great condition throughout. Most things seem to work ok.

Started her up, and the ol' rb20det seems to run nicely and smoothly, with no major issues I can see so far. Unfortunately with no compliance yet, its not going anywhere much further than the driveway.

Needs a clean and general tidy up over the next few weeks.. and if I ever find out the #@$#@$#@ who decided to sticky tape up the bonnet they're in trouble! Because cloth tape is an absolute BITCH to remove! (any suggestions???)

Paint has a few minor scratches and things but for a car 15 years old, as good as you'd expect. Only disappointment I guess is looks as if something has rubbed against it, or even suspiciously looks like a key mark along the rear left quarter :cheers:.. that was never in the original condition report or photos :D

Sometime its going to need the bonnet redone (probably replaced with a GTR or CF job), and the rear side resprayed. Maybe even a full respray. But oh well, for the price I no complain.. few hundred bucks will fix all that some day. This car will never be about the looks anyhow..

For $7200 so far (yes, really, landed and to my door), you can't really complain

Link to comment
https://www.sau.com.au/forums/topic/56822-shes-here/
Share on other sites
  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

predator Grand Master

predator

Posted
  • Author
Posted

Thanks guys.. its not perfect as you can see, but that is part of the challenge and fun of building it up from stock into a beast exactly the way I want it :cheers:

I will try bigKev - hope it works.. I think because the bonnet latch needed bending back down (2 minute fix) they taped it all down.. *shrug* Its annoying whatever the reason!

RB25 is going in probably late jan. Its pretty much ready to go though and i have the loom, ecu, etc... no idea about that plenum mod, old owner said he had no problems (but was only running mild power levels). Harder to change than leave be unfortunately, so guess its staying. Goal is around 240-270rwkw once that goes in, so shall be interesting.

Yotis: if yours was on the same boat, it should be any day now. On the car carrier that came down here, there was another grey R32, so there are a few going through.

Link to comment
https://www.sau.com.au/forums/topic/56822-shes-here/#findComment-1099260
Share on other sites
hippy Grand Master

hippy

Posted
Posted

hey i've seen that plenum mob before, it seems alot of people have it, anyways theres nothing wrong with it :cheers: and i'm sure its a little better than the standard crossover ...

can i ask? was that 7.2k landed for a manual? any other mods? is it possible to get one with rb25 already in there?

Link to comment
https://www.sau.com.au/forums/topic/56822-shes-here/#findComment-1099304
Share on other sites
MM2death Grand Master

MM2death

Posted
Posted
was that stimp's old rb25 u got it there?

car looks great.. guess it won't be long before it is all fixed :cheers:

It looks like it's stimps' old RB25 cuz of the stuff (i forget what it was) that he coated the penum with....turned out that icky colour.

Good luck Gord with the 32. You got a good deal.

Scott

Link to comment
https://www.sau.com.au/forums/topic/56822-shes-here/#findComment-1099405
Share on other sites
Oz Grand Master

Oz

Posted
Posted

hey gordo nice to see the wait is over & the car is here with no Big probs, as for taking the tape off try "Perp Wash" that should bring it off, if it dose make sure u use some paint cleaner after & then wax it.

As the name says its a prep wash for painting but is not to hard on the paint MAKE sure the car is parked in the shade & the paint is cool

Link to comment
https://www.sau.com.au/forums/topic/56822-shes-here/#findComment-1099493
Share on other sites
predator Grand Master

predator

Posted
  • Author
Posted

The tape must be the latest in Japanese rice.. I also have a bunch of receipts and a KFC receipt in Japanese, how exciting ;)

Will and Scott are on the money.. it *is* stimps old engine.. not the twin turbo one (i hope!) but the other one he had... I'm going to take those off at some point and get them polished or anodised.

Where do you get this purpsol or prepsol stuff?

Link to comment
https://www.sau.com.au/forums/topic/56822-shes-here/#findComment-1099531
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...