Jump to content
SAU Community

gtr front bar on gts-t

GOR33

By GOR33,
in Exterior & Interior Styling

 Share

Recommended Posts

GOR33 Mentor

GOR33

Posted
Posted

hey peoples

i have asked this before but i did not get much feedback, so i did a search and couldnt find much on the topic, so i thought id try again:)

i want to try and fit a genuine gtr bar onto my gts-t. ive heared that this can be done but there is a little over hang in the wheel arch.

i was looking through some old hpi mags and in the gts special, there was a harlequin coloured gts-t with a gtr bar on it, it looks like it fits good but if you look closer, the bar is slighty odd shapped under the headlights, as if it has been sqeezed on or something.

im just wondering if anyone has actually fitted a gtr bar to their gts-t, or knows if it works???

Link to comment
https://www.sau.com.au/forums/topic/57768-gtr-front-bar-on-gts-t/
Share on other sites
Sinista32 Grand Master

Sinista32

Posted
Posted

Hey Rodney,

Yeps. Fitted a GTR Veilside front bar to my R32 GTS-T. I bought it from UAS for around $500. The best way to fit, in my opinion, is take a small section out of the centre. That's what we did with mine. It wasn't much (1-2") but it fitted soooo good.

GOR33 Mentor

GOR33

Posted
  • Author
Posted

yeh i dont see why it shouldnt fit on, the gtr guards arnt too much bigger, its just thta this pic in the magazine looked bad, like he had used a gtr bar and squashed it into place makeing the top of the bar sorta bend under where the lights are.

also, does anyone know were u can get gtr lips? fibreglass or plastic, it doesnt bother me really?

xRHETTx Mentor

xRHETTx

Posted
Posted

Ive seen 2 r32 gtst with genuine gtr front bars that fit pretty well with no modification. They over hang into the wheel arches about 1cm maybe.

The main benefit of getting a genuine gtr front bar is that they are plastic, not fibreglass, and therefore much stronger and resistance to smashing.

Rowdyr32 Mentor

Rowdyr32

Posted
Posted

I.ve got a gen gtr bar on my 32 and all you have to do is put 2 slots in the bumper support and fold it up a little where there is that little rise for the number plate. Don't lissen to anybody who says they won't fit because there to wide.

GOR33 Mentor

GOR33

Posted
  • Author
Posted

sounds good, but im still worried about buying a bar that doesnt fit and needs extensive work.

if any of you have the hpi skyline special edition that was out a few months back, take a look at the green r33 in it, he fitted a genuine gtr bar, and it looks like its weird under the lights

linxus40 Community Regular

linxus40

Posted
Posted

this is my gts-t with gtr front bar

http://members.optusnet.com.au/linxus40/newcar1.jpg

http://members.optusnet.com.au/linxus40/newcar2.jpg

pic dosent really show it but there is a small gap in the sides below the indecators, about 5mm rinning back towards the wheels.

a very sexy look v's the gts-t stock one tho for sure

The Sherrid Proficient

The Sherrid

Posted
Posted

If I may put my two cents in here, I don't want to step on anyones toes here but i have to say that the comment from xrhettx about original bars being stronger is simply not the case. I make the GTR bar out of fibreglass to fit R33's and i have this to say. after makeing fibreglass spoiler kits for cars for some time now, it becomes aparent that people who make boats and kidies slides don't seem to think that its nescessary to think about what happens to front bars when they hit gutters and stuff. Understand this there are a few things to consider about a bars structure and they are,

any material that is bent slightly and returns to its original shape has the property of being elastic, if it doesn't return to its original shape then it is a plastic material. A hard material is more resistant to wear then softer materials and a tough material can withstand a large force without breaking where as its oposite state is a brittle material.

an original bar being made of a plastic material has a much greater ability to act in an elastic manner then a fibreglass bar, which idealy is what you want in a front bar, basically the more elastic the material the better. However there are other things to consider in a front bar. such as paint and once the bar becomes plastic then you will never get it back to its original shape. it remains eternally deformed and then fitting it properly and or fitting indicators back into place becomes next to imposible. A fibreglass bar can be repaired no matter how many peices it comes in. the most costly bar that i have ever repaired cost $150 and yes it was ****ed. none the less it was still cheaper to repeir then the cost of a new plastic one.

fibreglass is a hard material unlike your standard polyurathane bars which means that it doesn't wear as much as standard bars, this does'nt mean much because we are not subjecting our front bars to wear. except on the bottom of the front when you do gutters and shit. a good example here is the GTR lip on an original bar. its made of a highly elastic material which is actually different to the rest of the bar and can flex a whole 180 degrees except for a few hair line creases and thats about it. the best part is that its not painted so it still looks brand new. the fibreglass side is that you can lay the fibreglass in certain ways so that it has a considerable amount of flex in certain points. this makes the paint stay in tact and if it comes right off your car it wont try to rip the front guards off with it, which can become costly too.

The other good thing about fibreglass is that it is a tough material which means it can handle a harder hit then a standard bar. its a good property to have because it means that the paint wont crack when you hit something like some ****s foot. As a matter of fact when i make my front bars i am so confident inn there toughness that i have kicked one around the backyard for a bit, full pelt until i got tired (smoker) and it looked exactly the same as when i started. if i were to do that to a standard bar it would cave in.

the other thing about fibreglass bars is that they apear to be lighter then original bars. true and not true. you can make a front bar out of fibreglass and it can be half the weight. the only problem with that is it cracks very easy. this is the usual method that most manufacturers use because its cheaper to use less materials. if you count all the ribbing that supports a standard bar which is needed to reduce elasticity(looks like ribing on your gearbox) then you can have a front bar that is about the same weight as a properly made fibreglass bar.

to sum up in my opinion, an original bar is the better option if you cant find a fibreglass replacement of good quality or if it does not need to be painted like the original GTR lip.

GOR33 Mentor

GOR33

Posted
  • Author
Posted

sounds very true bogdan

i was under the impression that plastic bars were better, plus this guy on the forums has a genuine bar thats painted the colour of my car for a price i can afford at the moment, so this is why i am curious as to weather it will fit on my car.

the only thing is that his bar doesnt have the bottom lip on it, and i dont know if i will ever find one that i can afford either, escpecially around christmas!

so i might even have to just buy a full fibreglass bar unless i can just get a lip, or find sumone who can paint the bar for cheap:)

GOR33 Mentor

GOR33

Posted
  • Author
Posted
another pic to show the gap

http://members.optusnet.com.au/linxus40/side1-s.jpg

going to get kit resprayed and see if they can make the fit even tighter shortly

yeh mate you can see that gap a little more, i wonder if its different for 33s?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...