Jump to content
SAU Community

Recommended Posts

hey peoples

i have asked this before but i did not get much feedback, so i did a search and couldnt find much on the topic, so i thought id try again:)

i want to try and fit a genuine gtr bar onto my gts-t. ive heared that this can be done but there is a little over hang in the wheel arch.

i was looking through some old hpi mags and in the gts special, there was a harlequin coloured gts-t with a gtr bar on it, it looks like it fits good but if you look closer, the bar is slighty odd shapped under the headlights, as if it has been sqeezed on or something.

im just wondering if anyone has actually fitted a gtr bar to their gts-t, or knows if it works???

Link to comment
https://www.sau.com.au/forums/topic/57768-gtr-front-bar-on-gts-t/
Share on other sites

Hey Rodney,

Yeps. Fitted a GTR Veilside front bar to my R32 GTS-T. I bought it from UAS for around $500. The best way to fit, in my opinion, is take a small section out of the centre. That's what we did with mine. It wasn't much (1-2") but it fitted soooo good.

yeh i dont see why it shouldnt fit on, the gtr guards arnt too much bigger, its just thta this pic in the magazine looked bad, like he had used a gtr bar and squashed it into place makeing the top of the bar sorta bend under where the lights are.

also, does anyone know were u can get gtr lips? fibreglass or plastic, it doesnt bother me really?

Ive seen 2 r32 gtst with genuine gtr front bars that fit pretty well with no modification. They over hang into the wheel arches about 1cm maybe.

The main benefit of getting a genuine gtr front bar is that they are plastic, not fibreglass, and therefore much stronger and resistance to smashing.

I.ve got a gen gtr bar on my 32 and all you have to do is put 2 slots in the bumper support and fold it up a little where there is that little rise for the number plate. Don't lissen to anybody who says they won't fit because there to wide.

sounds good, but im still worried about buying a bar that doesnt fit and needs extensive work.

if any of you have the hpi skyline special edition that was out a few months back, take a look at the green r33 in it, he fitted a genuine gtr bar, and it looks like its weird under the lights

this is my gts-t with gtr front bar

http://members.optusnet.com.au/linxus40/newcar1.jpg

http://members.optusnet.com.au/linxus40/newcar2.jpg

pic dosent really show it but there is a small gap in the sides below the indecators, about 5mm rinning back towards the wheels.

a very sexy look v's the gts-t stock one tho for sure

If I may put my two cents in here, I don't want to step on anyones toes here but i have to say that the comment from xrhettx about original bars being stronger is simply not the case. I make the GTR bar out of fibreglass to fit R33's and i have this to say. after makeing fibreglass spoiler kits for cars for some time now, it becomes aparent that people who make boats and kidies slides don't seem to think that its nescessary to think about what happens to front bars when they hit gutters and stuff. Understand this there are a few things to consider about a bars structure and they are,

any material that is bent slightly and returns to its original shape has the property of being elastic, if it doesn't return to its original shape then it is a plastic material. A hard material is more resistant to wear then softer materials and a tough material can withstand a large force without breaking where as its oposite state is a brittle material.

an original bar being made of a plastic material has a much greater ability to act in an elastic manner then a fibreglass bar, which idealy is what you want in a front bar, basically the more elastic the material the better. However there are other things to consider in a front bar. such as paint and once the bar becomes plastic then you will never get it back to its original shape. it remains eternally deformed and then fitting it properly and or fitting indicators back into place becomes next to imposible. A fibreglass bar can be repaired no matter how many peices it comes in. the most costly bar that i have ever repaired cost $150 and yes it was ****ed. none the less it was still cheaper to repeir then the cost of a new plastic one.

fibreglass is a hard material unlike your standard polyurathane bars which means that it doesn't wear as much as standard bars, this does'nt mean much because we are not subjecting our front bars to wear. except on the bottom of the front when you do gutters and shit. a good example here is the GTR lip on an original bar. its made of a highly elastic material which is actually different to the rest of the bar and can flex a whole 180 degrees except for a few hair line creases and thats about it. the best part is that its not painted so it still looks brand new. the fibreglass side is that you can lay the fibreglass in certain ways so that it has a considerable amount of flex in certain points. this makes the paint stay in tact and if it comes right off your car it wont try to rip the front guards off with it, which can become costly too.

The other good thing about fibreglass is that it is a tough material which means it can handle a harder hit then a standard bar. its a good property to have because it means that the paint wont crack when you hit something like some ****s foot. As a matter of fact when i make my front bars i am so confident inn there toughness that i have kicked one around the backyard for a bit, full pelt until i got tired (smoker) and it looked exactly the same as when i started. if i were to do that to a standard bar it would cave in.

the other thing about fibreglass bars is that they apear to be lighter then original bars. true and not true. you can make a front bar out of fibreglass and it can be half the weight. the only problem with that is it cracks very easy. this is the usual method that most manufacturers use because its cheaper to use less materials. if you count all the ribbing that supports a standard bar which is needed to reduce elasticity(looks like ribing on your gearbox) then you can have a front bar that is about the same weight as a properly made fibreglass bar.

to sum up in my opinion, an original bar is the better option if you cant find a fibreglass replacement of good quality or if it does not need to be painted like the original GTR lip.

sounds very true bogdan

i was under the impression that plastic bars were better, plus this guy on the forums has a genuine bar thats painted the colour of my car for a price i can afford at the moment, so this is why i am curious as to weather it will fit on my car.

the only thing is that his bar doesnt have the bottom lip on it, and i dont know if i will ever find one that i can afford either, escpecially around christmas!

so i might even have to just buy a full fibreglass bar unless i can just get a lip, or find sumone who can paint the bar for cheap:)

another pic to show the gap

http://members.optusnet.com.au/linxus40/side1-s.jpg

going to get kit resprayed and see if they can make the fit even tighter shortly

yeh mate you can see that gap a little more, i wonder if its different for 33s?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...