R32 GTST auto 2 manual conversion?

[FLYNLO]

hey, i want to do a conversion from my auto into a manual... i dont want to just take it to a place and let them just do it.... i want to buy all tha parts my self then take it somewhere and get it done... the thing is im not sure of what parts i need to buy...any help please???

[Mr GTS4]

SEARCH is your friend.. its been covered alot.

have fun with it - i did it and it was the best thing i have done to the car.

[FLYNLO]

ok cool..so look it up in SEARCH,....its got a lot there???..... hey and did u do it urself..or where did u get it done...did u do it like how i wanna do mine or u just took it somehwere and asked them to do it

[predator]

afiak you will need.. manual tailshaft, manual crossmember, pedals, clutch master and slave cylinders.. gearbox, manual flywheel, clutch, pressure plate, thrust bearing, and if u want to get fancy the interior gearboot.

ask me again in 2-3 months and I'll tell you exactly

[FLYNLO]

y 2 or 3 months...i wanna start buying the parts very soon...should i start with these parts..

[FLYNLO]

and also does anyone know if an R33 gearbox would fit into an R32 GTST

[Mr GTS4]

don't know about the 33 gearbox fitting into a 32, might need a different x member. anyway a friend and i did my conversion. it would be abit harder because mine is 4WD and the box is about 2x heavier.

parts - clutch pedal, brake pedal

clutch master and slave cylinders

gearbox, clutch, flywheel ( need the manual flywheel bolts aswell )

manual spiggot bearing

manual x member

i think the tail shaft will fit ( mine did )

manual loom off gearbox

gearstick, console part that goes around the gear bit

you'll also need to cut a hole into the floor for the gearstick to come through.

i think thats about it.

i would just stick the 32 box in then find out how much the 33 box costs to fit cos the 33 box costs alot more than the 32 one.

[FLYNLO]

ok cool thaqnx man...i think ill just stick with the 32 gear box, and spend more money on the other parts like, the clutch and flywheel etc...

[RYanR31]

yes you will need to remove the auto spigot bush out of the back of the crank and replace it with the manual spigot bush which you can purchase from repco for 5 bucks or so, soak it in oil over night before you put it in...for more info PM me