Jump to content
SAU Community

Recommended Posts

do they acept chques?

If they are like 99 percent of businesses, they won't release the goods (ie. your car) until the cheque is banked and cleared. Assuming it gets banked on the day you pay it can still take 2-3 days to clear.

IMHO you are better off doing a direct deposit over the counter.

LW.

steve ask ucb if you can use direct deposit, straight to their account over the internet. I did it with my broker (Intergroup) on my last car. Made things that much easier. If i remember right the steam cleaning place is part of the docks, or at least not far away. Mine didnt need a clean even though it was dusty as, and some Japanese cricket creature was living between the coil packs...

steve

Dont stress about the bill of landing

You should receive it in the mail by the end of this week

As for payment you can use direct deposit,cash or bank cheque.

I had the car delivered before I paid and then went to UCB and paid with a bank cheque.

Internet banking would of been easier however the limit for me was 2k

He'll send you an itemised invoice with all the charges by mail.

Quick tip,dont bother with picking the car up yourself,I had organised a tow but it wasnt

worth it when delivery was only $60 on a flat bed truck to my door

Cant tell you much about cleaning as I didnt need it done

As long as your interior is clean you wont have a drama.

The outside of mine was filthy when it arrived.

if you dont wanna fork out for towing just ring up the DPI here in Perth and get a temporary movement permit. Tell them your'e going from Freo to wherever else you wanna go (mates houses to show it off? :D ) then to your house.

It costs $14.95, pay by credit card, and it lets you drive it as soon as its ready!

If its anything like in Sydney, the car will have next to no petrol so take a jerry can of BP Ultimate with you so you at least have enough to get to the nearest petrol station.

Personally I don't think its a very good idea to drive the car, particularly if its been sitting in storage and/or waiting for a while to be shipped. Oils and lubricants (or rather, the special active ingredients in them) tend to break down over a couple of months. Plus you never know what the condition of the car will actually be like till you pick it up :)

LW.

ill check the oil and coolant etc before even starting the car. and even top it up  etc

steve

I am not talking about the oil and coolant levels, I am talking about the quality of the oil in the car. For starters it seems its a common thing in Japan to not bother servicing it properly if your about to sell it, so who knows how long its been since the last oil change (in terms of kilometres and time). Then there is the fact that its probably been sitting still for god knows how long waiting to be shipped: during that time the oil additives are likely to have broken down at least partially. Moreover, you have no idea what was put in last time and since its a reasonably expensive proposition if something goes bang, a tow job is not a bad idea IMHO.

LW.

Seems your question has been answered but here it is from my experience when I did it.

Stuck car on Ship in the UK.

Paperwork posted to me in Aus.

Shipping company made contact with me confirming the arrival date as it was only an ETA on the paperwork posted over.

My broker who I knew personally kept me up to date so here is happened with him:

The broker had to book a time to collect the container (which wasnt opened). There is only about a 48hour window to collect it in otherwise it goes off to storage and incurrs hefty fees.

The take it to AQIS who do not know you from Adam so have to go through your broker as well.

AQIS were not allowed to open it until I was there (I wanted to check everything was intact and nothing missing incase of an insurance claim)

AQIS unpack it and inspect everything (in my case the car was packed full of personal belongings so they went through everything)

AQIS normally take a couple of days to do this, they then inform the broker.

I paid my fee to the broker including all taxes as they have already paid on my behalf to AQIS.

Once all is cleared financially, I arranged a flat bed to pick the car up and take it to compliance.

Job done.

Well just about! About 7 weeks later I recieved another invoice for $80 from my broker who had in turn been invoiced by AQIS for "Addtional Quarantine Fees". This was crap and I argued it with them as for all they knew I could have moved house, left the country.

HTH

Iwells - I didnt know that from the orginal post nor that the percentage was that high. Cheers for pointing it out. I shall leave my post incase it helps someone but if anyone wants it removed, PM me.

in answer to the thread question.

when my car arrived i was sent out an invioce with everythign i have to pay, including the towing to my door...

i have to wait about 10 days, the car will then be towed to my house.. Then have to tow the car to be complied, then rego, then fun

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...