Jump to content
SAU Community

Recommended Posts

Roy further more to our PM's.....

I just bought a 2535 today and im gonna give that a shot before i step up to a TD06 or 2835. Like JNR im hoping for a 12sec pass which i dont think should be too much of an issue (being 4WD).... Unsure if the added weight will hamper that possibility though, but launching it, that is if my gearbox is up to it, should net me a 12... Any thoughts anyone?

BTW being 4WD am i cheating lol....

Either way as soon as the results are in i will post 1/4 times, RWKW and AWKW.

well the guy over here who had the quickest rb20 down the quarter before adam did his time in a gts-4

pretty sure he used a 2535 too but i can't be absolutely certain on it

had a good clutch and usual supporting mods, powerfc fuel pump injs etc

was making close to 300rwhp i believe and with a big launch he got a 12.4

he's also had a couple of very quick rexes and knows how to drag race an awd (ie no mercy on drivetrain)

another mate did a 12.5 in an r31 with a standard rb20 using high flowed t3

well the guy over here who had the quickest rb20 down the quarter before adam did his time in a gts-4

pretty sure he used a 2535 too but i can't be absolutely certain on it

had a good clutch and usual supporting mods, powerfc fuel pump injs etc

was making close to 300rwhp i believe and with a big launch he got a 12.4

he's also had a couple of very quick rexes and knows how to drag race an awd (ie no mercy on drivetrain)

another mate did a 12.5 in an r31 with a standard rb20 using high flowed t3

yeah Dylans car had either a 2535 or 2530, drop in cams, power fc and usual supporting mods. The car run a 12.4 with Sean Tippet behind the wheel (no doubt dylan would have been able to run that time aswell)

i cant help but see a trend here in W.A with all of the fastest skylines being 32's.. and all of the fastest 32 gts-t/4's being 4 doors haha

my car is goin back on the dyno on wed to try and sort out a boost issue im having atm, still deciding if i want to try and crack 400hp out of this motor yet :)

IF it does it, it will only be a one hit wonder :huh:

I pressume it will take 28psi to get close enough for that sorta power on pump fuel, but a few of the drifters here are using martini race fuel in a 1part martini 2 part bp ultimate mix and seeing up to 50hp gains at the same boost levels so im tempted to try that (i recon its cheating tho) oh and thats on a std internald rb25 making close to 460hp if i remember correctly

decisions decisions... :rofl:

well the guy over here who had the quickest rb20 down the quarter before adam did his time in a gts-4

pretty sure he used a 2535 too but i can't be absolutely certain on it

had a good clutch and usual supporting mods, powerfc fuel pump injs etc

was making close to 300rwhp i believe and with a big launch he got a 12.4

he's also had a couple of very quick rexes and knows how to drag race an awd (ie no mercy on drivetrain)

another mate did a 12.5 in an r31 with a standard rb20 using high flowed t3

Just an update... I pulled out of the 2535 sale and have now purchased a HKS 2835....

So im really looking forward to seeing what times i can run :blink:

IF it does it, it will only be a one hit wonder :D

I pressume it will take 28psi to get close enough for that sorta power on pump fuel, but a few of the drifters here are using martini race fuel in a 1part martini 2 part bp ultimate mix and seeing up to 50hp gains at the same boost levels so im tempted to try that (i recon its cheating tho) oh and thats on a std internald rb25 making close to 460hp if i remember correctly

decisions decisions... :)

Martini race fuel? Man r u guys drinking b4 u drag?? no wonder u cant crack the 11s in an unopened RB20 !!

seriously tho, wats this fuel consist of?

Edited by jnr32r
Martini race fuel? Man r u guys drinking b4 u drag?? no wonder u cant crack the 11s in an unopened RB20 !!

seriously tho, wats this fuel consist of?

im sorry but.. is there any outher 12.0 or lower unopened rb20 r32 in australia??

martini race fuel http://www.martiniracing.com.au/html/fuels110.htm thats what i'll be using if i choose to (at this moment i see pump fuel is a greater acheivement)

hks 2835 is a nice turbo!

my mates s13 which i'm using atm has one on his sr

and i'm pretty sure the dude with the rb20 120y has done 11s adam and don't think he's opened the motor yet

i cant be bothered going for a look haha

im sorry but.. is there any outher 12.0 or lower unopened rb20 r32 in australia??

martini race fuel http://www.martiniracing.com.au/html/fuels110.htm thats what i'll be using if i choose to (at this moment i see pump fuel is a greater acheivement)

i was jokin Adam.

Im not aware of any unopened rb20 in the 11s.. ill race u there tho !

im sorry but.. is there any outher 12.0 or lower unopened rb20 r32 in australia??

martini race fuel http://www.martiniracing.com.au/html/fuels110.htm thats what i'll be using if i choose to (at this moment i see pump fuel is a greater acheivement)

Wont be too big a surprise. I was able to run a 12.9 at 114mph with only 15psi and a crappy 60ft time of 2.2 as i was worried about the std gearbox and open wheeling diff. So just drove it off the line. With some 40-45rwkws more at 19psi and the new KAAZ diff i would be really disappointed if i couldnt get my mph up to 118mph. Dont really care about et as as i dont want to hurt gearbox, need to save that for track days

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...