Jump to content
SAU Community

Recommended Posts

Power FC is in which I bought second hand, and just running of the base map... The guy I bought it of, had already done the start up procedures, so pretty much just took out the old ecu, and replaced it with the Power FC...

Everything runs fine, however this light comes on and stays on... What does it mean and is it a good or bad thing???

I am going to get my car dyno'd but not till Janaury (Christmas presents are expensive!)

So can anyone identify my light problem?

Link to comment
https://www.sau.com.au/forums/topic/58474-what-does-this-light-mean/
Share on other sites

umm, that is not good. That's the check engine light, which usually means you have no oil pressure or something has gone drastically wrong with your engine. In your case however, with a PFC fitted, the PFC uses the check engine light to tell you that your engine is detonating. Sometime the value at which the PFC will display the warning is set very low, this could be your problem, either way, check it out.

Richard

umm, that is not good. That's the check engine light, which usually means you have no oil pressure or something has gone drastically wrong with your engine. In your case however, with a PFC fitted, the PFC uses the check engine light to tell you that your engine is detonating. Sometime the value at which the PFC will display the warning is set very low, this could be your problem, either way, check it out.

Richard

So using the hand controller, how do I go and change the setting so the light is not on??? ie moving the warning up? And what should it roughly be set at?

It was fine when I had the stock ecu in, there was no light thingy.... Should I be driving round the next month or so like this????

If its running of the base map, it shouldnt be detonatin right??? I mean, I took it for a spin, everything seemed alright, ie engine temp, boost stayed constant @ 7psi still

Its a base map tuned for japanese ignition timing on japanese fuel. I wouldnt go around flogging it too much, but I am sure other people will disagree with me.

Does the light flash? The Power FC warning lights flash a sequence of codes, not stay on solid. Check and make sure that the boost controller option is turned off on the power fc. While the car usually doesnt start if this is on (and you dont have the PFC boost controller), I have heard of some starting and just showing the warning light.

At the moment running optimax on the car.... The light does not flash, it just stays on constantly.... So even though its on, and Im running off a base map, is it still stable to drive??? Everything seems fine when i drive it

Im guessing it would be stable to drive over the next week or so... I think ill get my dyno done earlier now...

If it's on and stays on, regardless of how you drive, chances are you still have the boost controller function turned on in the PFC, and don't actually have the boost control unit.

Ok, ill go check that out now.... Did anyone else ever have this problem??

  • 3 months later...

Those are the reverse EL dials.... I bought them from a Group Buy off here last year sometime...

Anyhow, the dials are gone now, and im back to the standard dash, but have red LED lights in it, which makes the numbers light up all red at night. Matches the amber defi's :P

this ones easy, your running a pfc with no apexi boost controller right?

if u check yr settings you'll prolly find the boost control is set to on.

THanks, yeah that was the problem... Had the problem ages ago when i just tested the PFC in the car... But now its all tuned, and making some healthy figures... ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...