Jump to content
SAU Community

Recommended Posts

  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

fjs r good motors and respond realy well 2 mods, a mate has a ra40 celica with a fj20det its a stock engine with ems,fmi,3",t04 on 10psi and made 310 rwhp no shit, its ran a low 13,

i own a z18et bluebird and a rb30e(soon et ) r31, as much as i like the skyline people expect them 2b fast but if u want 2piss people off beat them in a bluey :flamed:

up the bluey

p.s. this is pro910 logged in as hr31_rb20det

History of the FJ20.

Nissan were on the verge of greenlighting an F1 campaign in the early 80's, when F1 was small displacement engines running ridiculous boost levels. The FJ20 started life as the FJ15, and was designed to cope with power levels approaching 1000bhp, not bad for a 1.5 litre four.

Nissan pulled out at the last minute, and with millions of $$ R&D invested in the programme

(and tooling), stretched the capacity to two litres & fitted them to DR30 Skylines.

So the FJ20 is one VERY serious motor. Yes the SR20 is lighter, but serious horsepower freaks know that the FJ is tha shizzle.

Anyone remember Jeff Watsons FJ20 drag Sprite ?

for starters weight does play a large part in any forward motion regardless, if you have two cars with the same rough power output but 200Kg weight difference whos going to be faster, everyone knows the difference between just them in there car and when your mates are there too, the only true way to see which is better is in a controled enviroment.

EVL032 bad luck mate!!

nothing wrong with both motors, each to there own, also there are a few fj24det's out there.

I've been in a Gemini that cost about $5000 all up, only has 198hp at the wheels, and would munch a Skyline any day of the week!

thats nice, but as i said you put 4 mates in the same gemi and see how well it goes.... my skyline weighs in around 1150KG with the rb20det in it you put it next to a r32 with the same mods and mine will be in front!

at the end of the day the post i started will finally be resovlved with the fj20 i raced getting a dyno today so i will see what he had! i will get mine onced the T3/T4e goes on n we see how the Rb20 pans out once the turbo is on i think the forges will help me run higher boost safl;y so y he beat me in the FJ yes my car is reliable so iam happy!!!!!

sorry boys but it proves my point that i was right cause a mate with an FJ made 157rwkw and this guy with a microtec exhaust n FMIC makes 180rwkw.

thats one to me see it has more than he was saying yeh sorry thats just me boasting that i was right me = happy now

MERRY XMAS ALL

no iam not actually i would rather the RB20det. parts r easyer to obtain....BUT if u actually read the original post u would see that we were arging wheather it was just a FJ20 with microtec, xhaust, FMIC now at 180RWKW that proves i was right no way is that an FJ20 with only those mods.....sooo yes i was right

no iam not actually i would rather the RB20det. parts r easyer to obtain....BUT if u actually read the original post u would see that we were arging wheather it was just a FJ20 with microtec, xhaust, FMIC now at 180RWKW that proves i was right no way is that an  FJ20 with only those mods.....sooo yes i was right

can any1 confirm that a stock fj motor with 15psi , microtech, fmic, exhaust, air intake. can make 180rwkw?!

no iam not actually i would rather the RB20det. parts r easyer to obtain....BUT if u actually read the original post u would see that we were arging wheather it was just a FJ20 with microtec, xhaust, FMIC now at 180RWKW that proves i was right no way is that an  FJ20 with only those mods.....sooo yes i was right

Right first is first...NOE is not that way to spell KNOW or NO.....

An FJ20 with those mods will make that sorta power, the biggest power restictor on an FJ is the standard ECU/airflow meter....180rwkw is not outta veiw of an FJ with those mods

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...