Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Ok all settle in with a box of biscuits and i'll tell you my life story :bahaha:

When i got my learners permit i did the normal thing and started learning manual .... although i really didnt get the hang of it and my teacher was a total prick. I worked at a car dealershipw here i needed my license .... he told my mum that id never get thae hang of manual in time for my test ... and he also told me earlier that nobody gets a perfect score on their test.

So i changed my test to an auto test and i got a perfect score. With the intentions of getting my manual license later on. Which i didnt need to do as licensing stuffed up my license and gave me a manual one anyway.

Anyhow - basically i was employed by a dealership that chucked me in a Landcruiser didnt care if i could drive it or not and said no excuses your taking this down to licensing. At this stage i hadnt been in a manual since my learners which was like a year n half earlier. But suprisingly enough .... because i was relaxed in the car cos i didnt have my driving instructor next to me ready to give me a verbal beating everytime i stalled ..... i actually managed to get this tank thru the suburbs without stalling. I also had a boyfriend at the time that demanded that i drive hime home when he was drunk in the company manual cars. So basically i had to learn ... and learn fast.

My daily driver is still an auto but im fairly smooth in a manual these days. I think the person who is teaching you has a lot to do with how quickly you grasp the concept. Like everything it just takes practice and a willing to learn :rofl:

cool thnx. im planning to learn manual in feb sooo i can drive my skyline home when i purchase it.

hrmmm, when u say stalling the car, how often do u do it when u start learning ? ohh also isnt it just clutch in, change the gears and clutch out ?

this may sound stupid but how do u actually stall the car ? ppl tell me if u dont use the clutch properly it'll just stall, is it really like that ? if sooo wouldnt it be dangerous if u suddenly stalled when turning rite ?

I haven't driven manual much (maybe about 6-7 hrs total?)- I find there's nothing to going in a straight line and stuff... but try to get me to reverse park, and nope - cant do it because I dont have the practice with clutch control...

Just get the car (maybe get a mate to drive it back for you?), take it out late at night with nobody around, and practice in carparks etc until you have the hang of the friction point and what not...?

That's what I plan to do anyway :rofl:

Or get a couple of lessons in a manual car beforehand...???

yeah thats also a tip - when you buy a skyline and a first time manual driver dont get a heavy clutch like tripple plate or anything hoity toity. Makes it a lot harder.

You can stall the car by letting the clutch too quickly out ...... by coming to a complete stop with your car in gear and your clutch out. Theres a particular point "friction point" as someone put it earlier - if you miss this point where the clutch grabs car stalls ..... anyway hard to explain better done in theory. Its like teaching someone to swim - its better just to get out in the pool and do it.

hrmmm ive been an auto driver all my life *sigh* :Oops: i was wondering how long it would actually take to learn manual properly. like basically drive the car without help.

any comments appriciated.

I wasn't interested in driving a manual until I wanted to race cars!

Had been in autos all my life.

I occassionally drove a manual (mainly on the freeway on long trips) and had a general understanding of how a gearbox and gear changing worked.

I ended up taking a lesson with a driving school, just to make sure I had the basics right.

Then, I basically just jumped in the deep end. Bought a manual car, and kept driving until I got it.

I reckon it probably took about a week until I made it through a trip without stalling. Then, it eventually just started feeling natural. In fact, I got into an auto the other day, and found myself going for the clutch!

Best of luck!

If you let the clutch out quick when you're driving it will sort of jolt the car, and thats really not good for your gearbox and clutch and stuff. Best way to learn is to go to a driving school. If you've driven an auto for so long it will be much easier as you already feel comfortable in the car and understand the basic road rules.

That, and other drivers on the road will treat you a bit better than they would if you had a set of L plates on :rofl:

To learn manual doesn't really take that long, i used to suck at it but after about a month of regular driving i was fine with it. I just have a few problems with hill starts since i've had the new clutch in.

HAHA bike with a clutch...kinda like a motorbike eh?

Hey i learned manual the do or die way..i took a job driving a delivery van in the city with no experience at all by myself haha I didnt stall once either,i must be super manual learner or manual learning king or something eh...seriously though its not hard dude when your by yourself you just dont think about all the cars around you (well you know what i mean,you still pay attention) relax and because you have had the experience of driving an auto you know how to drive the car,like turning etc all you have to do is concentrate on the gear changes.I found the funny thing was learning when to change to what gear at what time the clutch was piss easy just as long as you move your foot smoothly up and down.

I drove autos for ages on my learners, but wanted to get a manual license... i took 5 x 30 minute driving lessons in a manual car and passed the driving test with flying colours first time, so it all depends on the person, and what sort of co-ordination you have etc.

Ok, I'll tell you my story. This is true, no bs. I got my r33 gtst when I was 18. I had only learnt to drive on auto, and never drove manual in my whole life. I knew the thoery. My car had a twin plate, as I was told by my agent. The first time I ever drove manual was when I picked my car up from the dock, drove it to compliance, then drove it to inspection with rta. Then I drove it ever since then.

I drove it fine from the start. No bullshit. I guess it all depends how coordinated you are. My gf (dumb bitch) can't even drive a manual lancer after trying about 15 times.

manual is easy just a few things you should know:

1 when you stop put the clutch in or car will stall, easy to forget when your under preasure

2 if you dont know what the clutching point is its very usefull. release clutch and use acelerator to hold car in one place without the need of a brake (usefull on hills so you can go without any rollback).

3 when changing gears press the clutch

4 you can slow your car down by gearing to a lowwer gear while in combination with your bakes

5 listen to your car, its engine noise will tell you when to change gears (that or be lazy and look the the taco)

6 dont change gears mid corner, be in the right gear before you get to the corner

think thats about it, just take it slow. it isnt that hard

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ah. OK. I take it back. I hadn't looked closely at the R33/4 arms and presumed that GKTech did as GKTech do everywhere else, which is to use sphericals there. The poly bushings are made to be 100% interchangeable, should use the standard bolt just fine. Every other bush in every other place in pretty much every other car, does.
    • @silviaz Ok cool, so much easier with a video. I can see why this video would be confusing for new players.   It is obvious that this entire bonnet is going to be resprayed, have a look in the background around 2:05, you can see a bunch of bare metal on the left side of the bonnet.  It's not an issue for the primer being laid down on the non-prepped clear on the bonnet. It will be sanded off at a later stage.  This might not be obvious to new players, but working on bare metal and factory paint in this instance, the factory paint is like a mountain and the bare metal is a huge valley. The bonnet needs to be levelled flat before it receives it's final stage of colour and clear coat. During this levelling process, the primer that is landing on the clear that you are worried about will be removed.  Also, this guy is out of control. Zero PPE while spraying, maybe he is a good example overall about what not to do lol.
    • Ok I FINALLY found a video lol. This took way longer than it should have as I could have sworn I saw multiple videos like this. I kept finding the completely opposite (the correct way of doing this). I wouldn't be surprised if I f**ked this up somehow.  I just realised where I've been getting confused and even with other things I work on. I haven't been doing things the regular way instead I'm going a roundabout way of doing things, like putting epoxy primer first then filler for example instead of putting just filler then primer on top of that, then wondering what happens if I get that primer on the clear coat that I haven't sanded yet. This was a bit of an epiphany 馃槀  But anyways, here this video. Time stamp, 2:56, some of the primer lands on the paint unscuffed above. You can see from the reflection it looks shiny.  
    • It does, this part circled in red. I assume the OEM bolt might not work well with the poly bushing because the dimensions may be different?
    • The J arm doesn't have bushes either. Assuming that by "J arm" you mean the part of the upright that runs down from the upper arm's outer bushes to the top of the hub. That has a kingpin style bearing in it. If you meant the lower control arm, it has 1 bush, at its inner end. If you have PU in there, that is superior to Nismo rubber. If you meant the caster/tension rod - it has 1x bush at the front end, and again PU is superior to Nismo rubber. But as I said above, I would definitely get the GKTech arms for that, as sphericals slay all other options there.
  • Create New...