Jump to content
SAU Community

Mobile Phone Photography


geno8r
 Share

Recommended Posts

well lets see, ive got a first gen camera only phone (ie no movie taking capabilities) 7250i the 7250 with night mode, not a bad camera phone but it is only 12 months old and typical nokia the speaker is starting to die and its now no longer in production..... typical technologies now adays, as soon as they release them they are already obsoleat.

any way here they are.

1. snowman taken using night mode due to sun going behind mountain.

2. taken of a brumbies supporter at the super12 grand final 2004. not sure if you can read the sign but it says cave bitch, he was pretending to be a NZ supporter.

3. friends bird. i had just clean the inside of my phone face.

4. not sure if any of you go to "Raves" but this is one of the DJ's at Transmission at the round house in sydney, using night mode.

5. transmission agian, it was the globe hanging from the roof when it was being shot with orange light!

6. near circular quay my mate and i saw this sign and had to get a photo.

7. Insomnia, canberra club, friends birthday only one light was left on, this would be one of if not my best night mode photo.

8. inaugural Porsche Mt Buller rally sprint, one of the only decent cars worth taking a photo of, it ended up DNFing due to his mechanic not working on the car.

9. this was taken when the GTR passed me at close to 200km/hr up mt buller road

hope you enjoy these photos,

hope they worked because this is the first time i have tried uploading pics to a forum.

*please fell free to use any or all photos, but please email me to advise you are using them. i like many others take pride in the photos i take and dont mind people using them, as long as they dont use them for ill effect.*

Link to comment
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I have some pics of my ride on my phone and can send mms, but I dont have a cable to down load them, is there anyone willing to download them for me, I can mms them to you, and email them back ?

cheers Stirlo.

Another option might be if you & a friend have Bluetooth, Bluetooth them to your friend who might have a cable or Bluetooth dongle on their computer.

Link to comment
Share on other sites

  • 8 months later...

that photo is pretty nice quality from a phone. I've got a SE W800 with 2mp camera, but i think it's cmos sensor as the image qual is not as good as my old sharp GX20 (was less than 1mp, but CCD sensor).

what type of camera phone is that mate?

Link to comment
Share on other sites

i got a D500, and im waitin on my bluetooth dongle to arrive so i can upload some pics

lost all the photos from my E700 wen it fell in the water, but i had some hilarious 1's on there!

had the cable for that 1, but it doesnt work with the D500, even though it fits the same hole! lol

anyone know where to get software for the D500?

Link to comment
Share on other sites

  • 4 weeks later...
  • 1 month later...

ok here's a few pics i took today near my office.

post-3621-1134301702.jpg

post-3621-1134301783.jpg

these ones are from a new bar that just opened up down the road. it's called minus 5 but when we were there today it was minus 13 degrees C inside! I was very surprised that the camera phone actually worked. there was another bloke there with a proper digi cam and a nokia camera phone and neither was working. Man it was cold in there.

first pic is the glasses made of ice, sitting on the table also made of ice, next to the ice sculpture...

post-3621-1134301981.jpg

here is the bar, also made entirely of ice as are the walls, seats, everything basically.

post-3621-1134302134.jpg

post-3621-1134302265.jpg

not bad pics for a phone, and in minus 13 degrees C!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Latest Posts

    • Got some decent progress after work yesterday and also today. Got the ECU all wired and passenger side interior all back together. Kept the wiring up nice and high to avoid people standing on it. Got the surge tank relays rewired and tidied up the pump wiring and cut a hole to bring the cables through.  I found a spare USB cable I had lying around so I decided to cut it up and see if I could use it for my CAN 1 bus. Turned out one of the pins I needed was to the shield of the cable so i cut it up and desoldered it and resoldered to the correct pins.  Had the issue with the powersteering hose hitting the A/C compressor and fan shroud. I pulled the bracket off and modified it to remove the front mounting point which now clears it all. Will keep an eye on it to see if theres any signs of fouling once it's up and running.
    • That's some good input mate. Nice.
    • So today I went well outside my comfort zone (again) to replace my valve cover gasket.  I have had a big leak over the exhaust leading to a lot of smoke and smell every time I drove it. The leak was in the rear driver's corner.  The job wasn't hard as such, just a bit finicky and time consuming.  The old gasket was rock hard and broken right where the leak was.  The leaky corner had so much sitting oil in it.  The good news to my amateur eyes was no buildup or sludge under the cover. It all looked fairly nice in there.   I haven't started it yet. I ran out of light and body when putting the coils and injector loom back in. Probs only 30min left for the morning.  I was so nervous putting the cover back on, I must have lifted it 5 times to make sure the gasket was still seated properly. God it's going to be nice to be leak free and not make other traffic light queuers think my car is about to explode.
    • Gave the Mazda it's first wash, it will need some clay, a light compound, and polish polish to remove a few swirl marks, but that will be a job for when I have a full day to get my DA polisher action on
    • Just did this job on my 32 with the boost doc kit. was quite simple to fit, hardest part was getting the rubber bungs back on the firewall. does anyone know how the heater will work now without the flap in the bend? Will I just have a heater on 24/7 now?
×
×
  • Create New...