Jump to content
SAU Community

Recommended Posts

Hey all.

I have searched the forum but cant seem to find a definite answer to my questions.

Im gettin a bosch high flow 044 and wonderin if i should be upgrading the regulator or the injectors?

I'm only after about 250 - 300rwkw.

I've been checkin out 2 different sard regulators;

1. Sard regulator 8mm Nipple( apparently suited to my power goal and I dont have to upgrade the injectors??)

or;

2. Sard TYPE-R regulator (apparently suited for higher boost applications and larger injectors??)

Any help is appreciated.

:D

Link to comment
https://www.sau.com.au/forums/topic/60406-sard-regulators-and-injectors/
Share on other sites

You will struggle to get 250 out of the standard injectors without at least a new rising rate regulator. (and I wouldnt really consider 300)

If you are going to spend the $ requred to build a RELIABLE 300rwkw motor the $1000 (or a bit less) for new injectors will be only a small component.

Check out some of the other threads, but you will need to strenghen the internals (rods and pistons) turbo, intercooler, ECU etc etc. your up for several thousand to do this, then you have a problem of getting traction on a gtst with that much power.

Hey all.

I have searched the forum but cant seem to find a definite answer to my questions.

Im gettin a bosch high flow 044 and wonderin if i should be upgrading the regulator or the injectors?  

I'm only after about 250 - 300rwkw.

I've been checkin out 2 different sard regulators;

1. Sard regulator 8mm Nipple( apparently suited to my power goal and I dont have to upgrade the injectors??)

or;

2. Sard TYPE-R regulator (apparently suited for higher boost applications and larger injectors??)

Any help is appreciated.

:D

If you want a Fuel Pressure Regulator Sard TYpe R, i have one ..

PM me.!! $190

Forget the regulator and just get bigger injectors. Simple! I'd probably avoid SARD as they are single jet type and not all that ideal for DOHC heads. Nismo/Apex/HKS make quad jet designs which are much better.

They dont hold there fuel pressure.

Or just get a SX.. double the price of SARD but better then ANY fuel pressure regulator in the world.

F1 car's use SX.

Cheers

Forget the regulator and just get bigger injectors. Simple! I'd probably avoid SARD as they are single jet type and not all that ideal for DOHC heads. Nismo/Apex/HKS make quad jet designs which are much better.

Ya, a few guys have had problems with the SARD ones on RB25s

Nismo make 740cc only, but if you have a PowerFC there wont be a problem, and they are only an extra $50 or so over Apex/HKS 550cc ones so if someday you wanna go for 300-350 you'll be all set.

You wont need a fuel reg either. Im still using my stock one.

270rwkw - nismo 740cc injectors and no problems.]

cheerss - ash

been doin some more research and am curious if a set of S15 injectors would be more suitable. Apparantly these can fit straight on. How much power are these good for?? Can they handle over 250rwkw??

Also read that I may be better off goin for a gtr fuel pump. How much power are these good for?? can they also handle over 250rwkw?? how much is a good price for a gtr fuel pump??

With these upgrades would it be necassary to upgrade the AFM?? If so, any recommendations??

:)

  • 2 weeks later...

Hmm, I was going to go for the 700cc Sards, great price from Greenline however this is the first time I have read anything bad..

Could someone explain this Single v quad issue to DOHC's heads?

Is this an *issue* or will it run well... or are we talking go for HKS etc...

Hmm confused now. R32 GTR

:rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
×
×
  • Create New...