Jump to content
SAU Community

Recommended Posts

OK it is confirmed. I spoke to Paul at Procar and we have booked the dyno for the whole day!!! We can have up to 15 cars possibly 18. so there are a few spots left so if u want in pm me your details and i will add you to the list

people attending so far

someonestolecc

CEF11E

basketcase

Resin

too_much_boost

too_much_boost's guest

MYS013

MYS013's guest

silver gts-t

kursed

people who will come if their car is ready

Abo Bob

democrazy_cakework

OK have set a date: 22/1/05 at 9:30 AM

thats next saturday!!!

The venue is Procar Pty Ltd

they are at:

7 Middleton Rd, DEE WHY, NSW, 2099

Phone: 9981 5099

Mobile: 0417 236 411

Fax: 9972 1947

What you get:

A. 1 test run to calibrate the machine, check a/f ratios ect

B. 3 Power runs in shootout mode in 4th gear

C. printout of you cars results (dyno graph)

D. wow factor when you know how powerful your ceff is.

Cost will be $50 each

The guy there is very helpful has a basic but good workshop. I have used his dyno sevral times before. he has a massive fan for intercoolers and all the stuff we need

Looks like we will be getting someone to do a pizza run during the day.

Link to comment
https://www.sau.com.au/forums/topic/60922-cefiro-dyno-day/
Share on other sites

  • Replies 113
  • Created
  • Last Reply

Top Posters In This Topic

Yes where is Cromer? I'll be getting my ceffie in Feb and i'll need a good gararge to take it to for a dyno run, compression test and a good going over before I drive it too hard. I'd much rather take it somewhere thats recomended. Otherwise i'll just take it around the corner to BD4s for conveinence sake.

Link to comment
https://www.sau.com.au/forums/topic/60922-cefiro-dyno-day/#findComment-1153806
Share on other sites

man.. ill come as well just to have a look.

BUGGER it one last cefiro meet with u boyz before i sell the car to get married. :)

booooohhhhhhoooooooooohhhhhhobbbbbbbbbooooooooohhhhhhooooooooooooooooooooooooooo

oooooooooooooooooooooooooooooooooooooooooooooooo :)

CC: give us a bozz biacth when the day comes....

Link to comment
https://www.sau.com.au/forums/topic/60922-cefiro-dyno-day/#findComment-1153817
Share on other sites

this narrows it down!

im from down the south side.

As I said if you lived in Sydney you'd know :wassup:

Seriously though - you know Manly? 15mins from there (about 6km) with no traffic.

Chatswood? 20mins from there (around 10km) with no traffic.

Ehm.. City ... 30mins from there (around 15-20km?) with no traffic.

If you have trouble on the day and wanna meet in the city or chatswood or manly (ie somewhere familiar) I'd be happy to lead you down to it.

:)

Link to comment
https://www.sau.com.au/forums/topic/60922-cefiro-dyno-day/#findComment-1153934
Share on other sites

Yes where is Cromer? I'll be getting my ceffie in Feb and i'll need a good gararge to take it to for a dyno run, compression test and a good going over before I drive it too hard. I'd much rather take it somewhere thats recomended. Otherwise i'll just take it around the corner to BD4s for conveinence sake.

I highly recommend Cromer Exhaust Centre - they don't have a dyno but for any other work they've been champs to me since I met them.

Checkout my thread here to read about my experiences with em (page 4 onward i think).

Link to comment
https://www.sau.com.au/forums/topic/60922-cefiro-dyno-day/#findComment-1153960
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Before starting any work, we attempted to adjust the tune. However even after adjusting it to certain extremes like completely stopping fuel, it had no effect. What fixed it was removing the Nistune Board and installing the original EPROM instead. This immediately fixed the issue. Everything should have been fine with the Nistune Board installation, so I am unsure why it has caused a problem. The soldered connector is also properly soldered. This worked when I first got the 550cc injectors, before cleaning, but that may have been a coincidence.  We ended up not installing the fuel pump hanger (at least for now). So currently running stock injectors, stock fuel pump, stock fuel pump hanger – Well everything stock except the exhaust. Now I have around €1400 in Nistune, Injectors, and Hanger collecting dust for the time being, perhaps I'll install them in the future. For now I'll enjoy the car as is 😁 Thanks a lot for all your assistance, I really appreciate all the help you have given me.
    • The turbo can’t be the issue. They’re proven to make much much power than you’re making. There is something in the setup that isn’t correct. - has the exhaust got any silly step downs? - what exhaust manifold?
    • Ok, just the way you wrote it made it look like you had the stagger the wrong way around 
    • I was getting anxious with the DVLA not knowing if the paperwork is fine or not, so I rang them. No update had been given, but I  was reassured that providing the box was ticked on the V750 then the application will go through fine. I've been checking the DVLA website pretty much every day, in the hope that it would have been done. Fast forward to Monday 29th  and I was greeted with a new screen on the check, and it finally showed as Taxed and MOT'd, woohoo! The car was in desperate need of a clean, not knowing when this day was coming it was put off. As far as I was concerned I had another 3 weeks  I'm not normally one for using snow foam, but I wanted to give it another try It hasn't cleaned up too bad considering it's 21 years old and lived on a boat for a number of weeks. The personalised number plate is J2 XBK, an illegally spaced number plate would have it read J2X BK. BK could either represent  the colour black or Baker, which is my surname. I filmed the first drive, the Youtube link will be at the end. I used the same driving route I did with the 323F V6 when I had a new exhaust installed, heres a couple of photos A few more since then Youtube video can be viewed here: https://www.youtube.com/watch?v=TjkFHPzjGDw
×
×
  • Create New...