Jump to content
SAU Community

Recommended Posts

OK it is confirmed. I spoke to Paul at Procar and we have booked the dyno for the whole day!!! We can have up to 15 cars possibly 18. so there are a few spots left so if u want in pm me your details and i will add you to the list

people attending so far

someonestolecc

CEF11E

basketcase

Resin

too_much_boost

too_much_boost's guest

MYS013

MYS013's guest

silver gts-t

kursed

people who will come if their car is ready

Abo Bob

democrazy_cakework

OK have set a date: 22/1/05 at 9:30 AM

thats next saturday!!!

The venue is Procar Pty Ltd

they are at:

7 Middleton Rd, DEE WHY, NSW, 2099

Phone: 9981 5099

Mobile: 0417 236 411

Fax: 9972 1947

What you get:

A. 1 test run to calibrate the machine, check a/f ratios ect

B. 3 Power runs in shootout mode in 4th gear

C. printout of you cars results (dyno graph)

D. wow factor when you know how powerful your ceff is.

Cost will be $50 each

The guy there is very helpful has a basic but good workshop. I have used his dyno sevral times before. he has a massive fan for intercoolers and all the stuff we need

Looks like we will be getting someone to do a pizza run during the day.

Link to comment
https://www.sau.com.au/forums/topic/60922-cefiro-dyno-day/
Share on other sites

  • Replies 113
  • Created
  • Last Reply

Top Posters In This Topic

Yes where is Cromer? I'll be getting my ceffie in Feb and i'll need a good gararge to take it to for a dyno run, compression test and a good going over before I drive it too hard. I'd much rather take it somewhere thats recomended. Otherwise i'll just take it around the corner to BD4s for conveinence sake.

Link to comment
https://www.sau.com.au/forums/topic/60922-cefiro-dyno-day/#findComment-1153806
Share on other sites

man.. ill come as well just to have a look.

BUGGER it one last cefiro meet with u boyz before i sell the car to get married. :)

booooohhhhhhoooooooooohhhhhhobbbbbbbbbooooooooohhhhhhooooooooooooooooooooooooooo

oooooooooooooooooooooooooooooooooooooooooooooooo :)

CC: give us a bozz biacth when the day comes....

Link to comment
https://www.sau.com.au/forums/topic/60922-cefiro-dyno-day/#findComment-1153817
Share on other sites

this narrows it down!

im from down the south side.

As I said if you lived in Sydney you'd know :wassup:

Seriously though - you know Manly? 15mins from there (about 6km) with no traffic.

Chatswood? 20mins from there (around 10km) with no traffic.

Ehm.. City ... 30mins from there (around 15-20km?) with no traffic.

If you have trouble on the day and wanna meet in the city or chatswood or manly (ie somewhere familiar) I'd be happy to lead you down to it.

:)

Link to comment
https://www.sau.com.au/forums/topic/60922-cefiro-dyno-day/#findComment-1153934
Share on other sites

Yes where is Cromer? I'll be getting my ceffie in Feb and i'll need a good gararge to take it to for a dyno run, compression test and a good going over before I drive it too hard. I'd much rather take it somewhere thats recomended. Otherwise i'll just take it around the corner to BD4s for conveinence sake.

I highly recommend Cromer Exhaust Centre - they don't have a dyno but for any other work they've been champs to me since I met them.

Checkout my thread here to read about my experiences with em (page 4 onward i think).

Link to comment
https://www.sau.com.au/forums/topic/60922-cefiro-dyno-day/#findComment-1153960
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...