Jump to content
SAU Community

Recommended Posts

Jerry's looks good (pic1) and the sound system blasts!

That Red Supra is Super Sic, and the best examples around (cos I lerve big noise from sound sys). Jayce was speaking to the guy's and the owner's had a few engine probs but is putting in a newley rebuilt 2JZ real soon.

apparently the corrola(pic3) goes off! i had to take pics of the ozmans wrx im not a fan of them but you gotta admit its nice (i just wish they would stop winning allthe awards) the blue r34 was taken out front of my skool and is super blurry and the strathfield chics well, i think weve all got our own opinions lol! as for the 180sx, a bit strange and and could someone fill me in with the r33 like if anyone knows what it has under the bonnet?

here is some more random photos out of my phone. The first one is someone at light house on a bull. 2. is my dog on the drivers seat. 3. my leg after hockey and no shin pads. 4. bad shot of bogans at the pub. 5. a mate of mine at the light house.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...