Jump to content
SAU Community

hi-flow cat


Recommended Posts

Guest GR33DyMANGO

hi,

i just received a phone call from the guy doing the compliance on my car and he said i had the option of upgrading my catayltic converter from the standard 2.5inch one to a high-flow one for an extra $250.

whats the deal? would i get any performance gains with the high-flow cat? i'll get a new exhaust from the cat back soon after.

so does this high-flow cat make any difference or is it just a waste of money?

ta,

justin.

Link to comment
https://www.sau.com.au/forums/topic/6196-hi-flow-cat/
Share on other sites

If you have any plans of improving your exhaust system - which most people do - then you should think about the cat. Having said that, $250 is what I paid for mine when I had the rest done so maybe see if he is open to offers and save a few quid, might be worth a try. If he is fitting a high flow instead of the standard, he would be saving on the price of the standard so you may as well save some extra too:)

Link to comment
https://www.sau.com.au/forums/topic/6196-hi-flow-cat/#findComment-93124
Share on other sites

For two fitty I would say it isn't a true high flow cat. Maybe a "higher" flow cat. Usually it simple has larger flanges on the end.

Still it isn't a bad price, and usually worth getting just realise that it isn't a high flow or racing cat. I would try to get the price down.

If you are doing basic mods for now it will be more than enough, if you are going to go pretty serious with it, it might be better off saving for a proper cat/ full systen at a later stage.

Cheers,

Tim

Link to comment
https://www.sau.com.au/forums/topic/6196-hi-flow-cat/#findComment-93220
Share on other sites

I had a catback3 inch exhaust system with my car from Japan.

Earlier this week I got the front and dump pipes fitted with a high flow cat.

There has been a substantial power increase from my seat of the pants impression and the workshop said the difference is about 15hp (at wheels or engine dunno)

It sounds a whole lot better too:D

Can hear the turbo whistling now

Brian

Link to comment
https://www.sau.com.au/forums/topic/6196-hi-flow-cat/#findComment-95435
Share on other sites

Hi GR33DyMANGO,

I assumed you're going through Dany Fisher for your compliance work and your Skyline is the silver one that came off the boat on the 12/11/2002 ?? Anyway, I'm going ahead with the upgrade to the high-flow cat ..

Well I was thinking, considering that I've just bought a car that's not exactly friendly to the environment, might as well spend an extra $250 to do my bit to help reduce emission .. :burnout:

Bye

Simplelogik

Link to comment
https://www.sau.com.au/forums/topic/6196-hi-flow-cat/#findComment-96805
Share on other sites

Guest GR33DyMANGO

hi simplelogik yer thats right :D

also, i thought it was $250 but its only $200. its all good.

hey dont spoze u know how my cars going? how far through the process is it? when should it be ready? i cant wait to take it home... im sure i'll be polishing it for days on end, its soooooo dirty:)

Link to comment
https://www.sau.com.au/forums/topic/6196-hi-flow-cat/#findComment-97418
Share on other sites

Hey GR33DyMANGO

Was you the guy who took the silver Spec II for a spin last Tuesday around Welshpool from Danny Fisher's place. If so, I saw ya there as I was picking up the red Spec II that had just been finished and registered??

Al

Link to comment
https://www.sau.com.au/forums/topic/6196-hi-flow-cat/#findComment-97576
Share on other sites

Guest GR33DyMANGO

hi there al,

yer that was me. haha.. yer i had just taken it for a little drive. i accidentally did a massive burnout coming onto welshpool road.. i had the biggest smile on my face.

i thought i recognised your car:) i just couldnt figure out where i;d seen it. i should've said hi. hopefully i will catch up with you at a cruise sometime soon:)

you must be pretty happy with your new car. it looks awesome. how long did yours take to get complied? and did u bring your car in so clean? mines sooooooo dirty. i was wondering if he;s going to clean mine b4 i pick it up... but im probably in dream land.:D

ciao

justin

Link to comment
https://www.sau.com.au/forums/topic/6196-hi-flow-cat/#findComment-97804
Share on other sites

Originally posted by GR33DyMANGO

you must be pretty happy with your new car. it looks awesome. how long did yours take to get complied? and did u bring your car in so clean? mines sooooooo dirty. i was wondering if he;s going to clean mine b4 i pick it up... but im probably in dream land.:)

Justin,

It took about 3 weeks all up (but I got Danny to go slow as our first baby arrived at the same) so was busy with him.

I too got the hi-flow cat to go with the exhaust system.

Car was clean coz I got it detailed cost about $200 or so and they did a great job - it didn't look like that when I saw it at the wharf that's for sure.

Once he gets going compliancing only took just over a week but then there is the alarm system, servicing and the licencing which took two days. Did you know Danny is going to offer servicing and maintenance on the cars he complies - we were talking about it when I picked mine up.

One thing to look for are the mods that you don't get told about like mine had a Pivot Quickshift, Blitz BOV, turbo timer none of which were on the auction sheet.

Once jnr gets settled will definately go on a cruise or two or three.

Cheeres, Al

Link to comment
https://www.sau.com.au/forums/topic/6196-hi-flow-cat/#findComment-98252
Share on other sites

Guest GR33DyMANGO
Originally posted by Red Sky II

Justin,  

It took about 3 weeks all up (but I got Danny to go slow as our first baby arrived at the same) so was busy with him.  

I too got the hi-flow cat to go with the exhaust system.  

Car was clean coz I got it detailed cost about $200 or so and they did a great job - it didn't look like that when I saw it at the wharf that's for sure.

Once he gets going compliancing only took just over a week but then there is the alarm system, servicing and the licencing which took two days.  Did you know Danny is going to offer servicing and maintenance on the cars he complies - we were talking about it when I picked mine up.

One thing to look for are the mods that you don't get told about like mine had a Pivot Quickshift, Blitz BOV, turbo timer none of which were on the auction sheet.

Once jnr gets settled will definately go on a cruise or two or three.

Cheeres, Al

hi al:)

whoa... $200 for a car detail. i wish i could afford that. alot of elbow grease is what im going to use. i cant wait to give it a nice clean.

i didnt know about the servicing and maintainance that danny offers. i'll probably just do most of the servicing myself. one of my uncles is a mechanic... so i should be ok there.

mine has a turbo timer, a kenwood rear speakers, kenwood splits and a different shifter which i didnt know about. it was almost like a little xmas gift:D

pm me when u r able to go for a cruise:)

ciao

justin

Link to comment
https://www.sau.com.au/forums/topic/6196-hi-flow-cat/#findComment-98526
Share on other sites

Originally posted by GR33DyMANGO

whoa... $200 for a car detail. i wish i could afford that. alot of elbow grease is what im going to use. i cant wait to give it a nice clean.  

My car had some good detailing done to it with its previous owner. All i do now is spend about 1hr/wk washing it inside and out and it makes the whole job so much easier.

Link to comment
https://www.sau.com.au/forums/topic/6196-hi-flow-cat/#findComment-98531
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...