Jump to content
SAU Community

Recommended Posts

then you can help me find this crazy clarks aussie BP pie yatala shop place thats so damn easy to find that no one wants to just post a map and stop the crap :jk:

As you can plainly see my MSPAINT SKILLS ROCK!!!

map.jpg

Follow my pink bits! :D

  • Replies 315
  • Created
  • Last Reply

Top Posters In This Topic

My prediction:

sau_png.jpg

(1) 8:45pm, SAU Gold Coast people running late come north up the M1

(2) 8:46pm, Everyone is in the right hand lane, so a mad dash accross 3 lanes to get to the correct exit in time. At this point several of the group will not be able to get accross and will continue north, probably ending up in Logan somewhere. When they hit the roundabout at the bottom of the off ramp, the majority of the group will take the wrong turn to the left. Several will make the wrong turn straight ahead to Yatala Pies, and although the odds are against it, someone may take the correct turn to the right. Doubtful.

(3) 8:52pm, Having realised they are going the wrong way, they will phone a Brisbane SAU member to find directions. The directions will start with "Do a u-turn", after this the Gold Coast members will tune out and do a right hand turn, followed by another right hand turn when the road runs out.

(4) 9:07pm, After negotiating most of the backstreets of Yatala, they will head south for a good 20 minutes or so before realising they have gone the wrong way. I am not sure what happens at this point, but somehow...

(5) 9:48pm, Gold Coast SAU members arrive on the river on a car ferry and are dropped off at distillery rd, as per the Brisbane SAU members instruction. Here they will follow distillery rd, until there is an option to turn. Which they will take.

(6) 10:15pm, Gold Coast people finally arrive and ring Brisbane SAU members to find out where everyone is. By now, Brisbane people are somewhere more than 4 turns away, so the Gold Coast members will call it a night

(7) 10:22pm, Everyone gets flashed by that goddamn speed camera that always sits just past that on ramp.

(8) 10:43pm, Gold Coast sau members whinge about being caught speeding on intarweb forums, followed by organistion of another cruise in 8 different threads for 4 different locations at 3 different times (and days).....

any gold coast people below labrador/southport/comera, arrr **** it- north gold coast- who dont know where to go, meet me at coomera bp ready to leave at 8, so 745!

it is so friggin ezy to get to this place that its not funny, man even i found it the 1st time, and thats coming from me:)

well thanks for the map Ska.

Now us useless Gold coast ppl understand that aussies actually refers to aussies tavern, which is 2 words for those brisbane ppl who feel the need to shorten everything, as their time is so important that giving the exact name of a meet location is beneath them and shame on any simpleton who has never been to the said location before, as they should know exactly where it is even though only half of the name and no street name are given. Perhaps even refidex page numbers and grid references could be provided for anyone that is pink colorblind.

btw i know where it is and was just taking the piss i do however believe that making other ppls lives easier tops up my good karma and stops me from being defected :headspin:

Dont think so afro, you coming on this cruise? i saw you the other day on corro drive at milton im pretty sure.

YA I'LL TRY TO COME,,

PROBABLY WASEN'T ME U SAW,, I'VE HEARD THERE IS ANOTHER BLUE R34 GTT FLOATING AROUND BRISY ,, GRRRRRRRR,,

SO IT COULD HAVE BEEN THAT ONE,,

It was a pretty good night except for us losing half the people coming out of the carpark. :)

There was nothing wrong with my intercooler supports. I think everyones car has been held together by cable ties at one stage or another.

Anytime steve. There's nothing quite like the challenge of driving through the boonies whilst trying to give someone directions on your mobile and also talking on the radio.

Was a good night except for heaps of people getting lost. :)

Anytime steve. What do you mean dodgy cable tie job? Eeryones car has been held together by cable ties at some stage or another and I've seen much worse than that in the past.

And nothing beats the challenge of driving through the boonies whilst trying to give someone directions on how to follow you whilst still listening to the radio.

Edit: something is buggered with the forums because The time I posted this was about 10am friday the 4th.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...