Jump to content
SAU Community

Recommended Posts

hey guys, im really interested in a few r32's on the prestige site.. but im real concerned bout the whole importing scene. For example, there's an r32 estimated for $11,500, but how much would this cost me all up after its here in syd? I mean, up until now, i thought cars under the 15yr rule didn't need compliance LOL im so confuseeeeed! I don't know if importing is a wise decision now.. any comments much appreciated. Thanks :D

Link to comment
https://www.sau.com.au/forums/topic/62838-wantin-to-import-r32-need-help-thx/
Share on other sites

Add a few grand to get it to a reasonable state......compliance will be up to about 1500......plus servicing, paint touch ups, tyres, stuff like brake pad replacement if needed and so on.

Then you have rego to pay also.......not to mention insurance. Sometimes alot easier to buy something that is already complied.

there's an r32 estimated for $11,500, but how much would this cost me all up after its here in syd?

As the website says and as RS has eluded to, after that, you'll need to allow $1400ish for the work required to make the car comply with ADR's (but not SEVS compliance, different story), then rego+CTP, say $700, then stamp duty at 3% (whatever that is, too lazy). You may need tyres. You may need engine work. You will want to have the vehicle serviced (possibly cleaned). You may also need to pay for road freight if the vehicle ships with Kiwi Car Carriers (they only deliver to Brisbane).

Add all that up. Now you have a figure which you can compare against R32's you see in the trading post. The difference (if any) will be what you are saving by taking the risk of buying a dunger and the stress/headache of messing about importing the car. If, in your opinion, you'd prefer to save the cash/be the first Australian owner/whatever, go ahead and import the car, you'll prob come out ahead. Keep in mind though, that the cheaper the vehicle (moreso the lower the median sale price of that particular model) the more savings to be had. What I'm saying is, you'll save more by importing a 1999 GTR than you would by importing an 89 S13, as the fixed costs are the same (well not exactly, but reasonably close bar import duty/GST)

The car doesn't need to be imported through a RAWS. A 15yr old car can be imported, and delivered to your house for your to muck around on, like a few blokes here are doing. If I remember rightly, a SEVS car must go to the workshop for 'real' compliance. They are two totally different things that people tend to use the same term for, which is why you feel confused.

Hope it helps.

Mark

As the website says and as RS has eluded to, after that, you'll need to allow $1400ish for the work required to make the car comply with ADR's (but not SEVS compliance, different story), then rego+CTP, say $700, then stamp duty at 3% (whatever that is, too lazy). You may need tyres. You may need engine work. You will want to have the vehicle serviced (possibly cleaned). You may also need to pay for road freight if the vehicle ships with Kiwi Car Carriers (they only deliver to Brisbane).

Add all that up. Now you have a figure which you can compare against R32's you see in the trading post. The difference (if any) will be what you are saving by taking the risk of buying a dunger and the stress/headache of messing about importing the car. If, in your opinion, you'd prefer to save the cash/be the first Australian owner/whatever, go ahead and import the car, you'll prob come out ahead. Keep in mind though, that the cheaper the vehicle (moreso the lower the median sale price of that particular model) the more savings to be had. What I'm saying is, you'll save more by importing a 1999 GTR than you would by importing an 89 S13, as the fixed costs are the same (well not exactly, but reasonably close bar import duty/GST)

The car doesn't need to be imported through a RAWS. A 15yr old car can be imported, and delivered to your house for your to muck around on, like a few blokes here are doing. If I remember rightly, a SEVS car must go to the workshop for 'real' compliance. They are two totally different things that people tend to use the same term for, which is why you feel confused.

Hope it helps.

Mark

Hmmm thanks for the help mate. I worked out the costs for a few of the r32 gts-t's.. and it seems to save 4 - 5 grand considering the mods on them.. BUT! What happens if the car gets here n the engine is on it's way out? Or a huge mechanical problem as such? There isn't some sort of insurance u can get ay? I don't think i wanna take the risk of something like this happening without the insurance.. lol

no insurance.. the insurance is paying more to buy it locally..

the jap mechanical inspections aren't meant to be much chop most of the time.

my car cost $7k to my door.. another $2k onroad.. I could sell it for $12k tomorrow..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
    • So while the second sentence is completely correct and the whole point of the conversation, the first sentence bears consideration. If this bloke is just hoping to throw big turbos on and drive it around, because there are no helpful facilities at all in his tropical paradise** then he likely has zero chance of even knowing what the TP is on the last column in the stock maps, let alone know whether the ECU is operating anywhere near it or past it. So the point is very very moot. And, per what I said before, at stock boost on those turbos, you may well be off the end of the map. **I'm just back from Vanuatu, so I know exactly what small Pacific nations can be like wrt paradise without requisite facilities. But it's not even that simple. I put a high flow on my car and had to drive it around without a proper tune because of the lack of opportunity*** to put the bigger AFM and injectors into it to allow it to be tuned. I had to turn the boost down to less than I had before, and back off the boost controller's ramp, because it was exploring parts of the map that it didn't drive in before, and really couldn't access for tuning on the dyno either, and so was pinging. It was still well within the last column, because when I first**** set up the Nistune on the Neo I rescaled all axes of the maps to give some more space to explore. ***Family dyno was broken ****This was 13 years ago, and the TIM thing wasn't a thing then and so TP would definitely grow when pushing past the stock tune's limits.
×
×
  • Create New...