Jump to content
SAU Community

Recommended Posts

Bushes sit between moving metal parts. They can help absorb shock as well as the prevention of wearing of metal parts. Different bushes have different hardness - usually stock ones are on the soft side to give driver comfort and realistically aren't designed for agressive driving. Upgrading to poly bushes or similar can make a noticeable difference to the firmness of handling and IMHO are a worthwhile upgrade.

Steve

Link to comment
https://www.sau.com.au/forums/topic/6318-bushes/#findComment-95219
Share on other sites

FYI

I just called a whiteline distrubutor here in vic, and I got some prices for polyeurathane bushed for an R33

Front control arm uppers: $145

Strut to chassis (front): $107 ($63 for standard)

Rear control arm upper: $??? (no price)

Rear sway bar mount to chassis: $14.44

these guys are in 28 Ovata drive, Tullumarine

ph: 9330 1166

I'm getting a squeek from the front in the mornings when the car is cold. I dont suppose any1 has had the same, and changed their bushes. Its just that I haven't looked at them yet, but i was sondering which of the 2 it is likely to be...

Zahos

Link to comment
https://www.sau.com.au/forums/topic/6318-bushes/#findComment-95386
Share on other sites

inark:

Pineapple rings are used for one of 3 different applications. They can be set up for drag (increased rear squat on launch), drift (opposite of drag) or general performance (in between). They also help reduce axle tramp.

Zahos:

Sorry I didn't mention this before, whiteline also do 'handling' kits - buy as a kit and save a few bucks - may be worth a look.

Link to comment
https://www.sau.com.au/forums/topic/6318-bushes/#findComment-95395
Share on other sites

  • 2 weeks later...

I have a '95 R33 GTS-T and it has after-market suspension, when i drive on some bumpy roads i get rattles (i think only from the rear), i always thought it was just the jack or something in the boot moving around but the previous owner said i need to get "bushes" coz its metal on metal and thats the sacrifice u make for having good suspension.

How do i know what set of bushes i need ? there are like 243 different products on www.whiteline.com.au

Link to comment
https://www.sau.com.au/forums/topic/6318-bushes/#findComment-102256
Share on other sites

also try superpro

http://www.superpro.com.au

they make the polyurethane bushes whiteline sell, or so the suspension guy told me. they are blue, not yellow, and cheaper, thats all the difference, same parts and quality.

Ive just done the castor bushes in my s13. much nicer.

Link to comment
https://www.sau.com.au/forums/topic/6318-bushes/#findComment-102374
Share on other sites

Benm,

Do you have coilovers? I have then and they will give you a rattling sound, that is because they don't necessarily use rubber between the spring and the top of the suspension, therefore when you go over a stiff bump the spring compresses and then rattles against the metal of the chassis.

If you dont have coilovers thenI don't have any suggestion.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/6318-bushes/#findComment-102614
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...