Jump to content
SAU Community

Recommended Posts

Ok, so it's no secret that last night, mother nature went batshit ****ing loco!

so lets just use this to say what has happened to your house/car/around you.

if something was damaged, maybe someone knows someone who knows someone who can help fix it?

i woke up this morning to get to work at 7 (as promised to one of the employees who hasnt shown up yet [shit]), i had to go feed the dogs, go outside, backyard was pretty much our new swimming pool, with grass.

my dogs seemed fine, except that the youngin was a bit stressed, and both were muddy, A LOT!

drive down the road out of my court, and some guys fence is down. worst, always happens to him due to the large amount of wind that passes through his big yard he uses to keep trucks.

other than that atm, theres ambo's going everywhere, firetrucks everywhere else, and our factory office suprisingly didnt get flooded like it usually would of in this kind of weather

(Dox 1 - Nature ZERO!)

Link to comment
https://www.sau.com.au/forums/topic/63386-melbourne-storm-report/
Share on other sites

We have no power but fortunately haev gas heating so fine for showers. Cat went a bit mad though, spent the night walking around on the tips of it claws with its back arched at nothing!

Few trees down on beach road. Also a few sets of lights out. Balcombe Road and Nepean highway is but there were no police there when I left.

Cars were fine and glad to see my hunt for a double garage paid off!

Heard reports of people in the west turning round and going home as the west gate was a nightmare

I got within 200m of work, then the road was closed with a big arse tree down, so had to go around another way, besides that had to drive through about a 1foot deep puddle...

Tip for anyone driving through puddles: always drive at a slow constent speed (don't slow down or accelerate through them)

My house, lots and lots of garden damage - busted flower pots, a number of bent trees/bushes, lots of mother's roses (the stick things with a ball of flowers on the top) bent over, dirt everywhere, water everywhere, shade cloth uprooted it's star pickets and threw them around all over the back porch..

I think there was some wind last night!!!

Apparently there was to be more rain today (according to nova100), but i haven't seen any yet and the sun seems to be shining (thank god)!

-Patrick

my house is a split level on a slope, so the downstairs bit at the back of the house sits low. I went downstairs in my jocks to grab some socks off the clothes horse; and there was about an inch of water that had got in. Spent an hour mopping it all up, filled up 3 5 litre buckets! Wet the wooden floor aswell, hope it doesnt crack and warp once it dries out. Got to work late (that wasnt a problem, i woke up a bit late because my alarm clock stopped working because there was a power cut last night)

I cant blame the storm and was told that apparently I cant blame the guy because accidents happen, but this morning I was travelling inbound along dynon road and due to flooding on dynon rd, it was partly blocked off out bound, PARTLY... and some f**ker driving on the otherside of road assumed the entire road in both direcitons past the intersection was closed and decided not to look as he turned right at the intersection i was travelling straight through and hit us. The car is a ride off I keep getting told, I find out tomorrow if the 32 is a goner ;)

Yeh the weather has been crazy, the bus i catch to school had to take a detour because the Hurstbride bridge was completly flooded, for anyone that knows the water normaly its around 3 meters below the bridge and now it was over the bridge. diamond creek bridge was closed and behind the diamond creek footy groud was completely flooded the water rose 2 metere's over night and flood the whole area.

yeah it took me 5 hrs to get to work this morning!! i woke up late n then i ran to the station n found out that all trains had been canceled then the guy said train comming at 9:40 so i waited didnt get there till 12:15 and i got to work at 2 yay now i have to make up 5 hrs die ***ers die!!!

Anybody around the city today?

Have a peek at the MCG.

There were 5 HUGE GROLLO cranes yesterday and today there is 4.5. One of them literally snapped off from where the operator sits.

It is still attached but is drooping along the ground.

Spoke to one of the tradesmen and apparently it smashed its way through a couple new buildings and came very very close to hitting the security guards hut, which was occupied.

On a lighter note a had a laugh to myself at all the lawn bowls clubs I seen today. They had turned into swimming pools with the curators standing around scratching there heads.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...