Jump to content
SAU Community

Recommended Posts

i wouldn't mind if you could PM me the details on how the hell uve managed above 200rwkw and still witht he standard internals without damaging them over time.... but i guess its up to the drivers right foot as to whether the car internals get a bashing :)

but yes, can u give me the details and where ic an get my hands on such beautiful things, as im only after roughly 200rwkw... im stock as a rock except for POD [need to get an air partition] and stock everything else... :) but if i can get a rough pricing on what i need to get to 200-240rwkw id be more than happy to take a few days into driving up there, getting him to set it all up and driving back to melbz

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

240rwkw @13psi seems very hard to beleive. From what i have heard you would need to run around 18psi to get those figures... Not doubting your results just amazed. Tang0 want to take your car out next week monday or tuesday to see how it goes compared to mine? I got 240rwkw and would love to compare.

Afraid I'm starting to doubt as well after my run yesterday. Same setup with richer mixtures as the tune needs a touch up and a manifold at 13psi i got 199.2. I've cleaned up the tune a bit and shes a bit quicker now but not 40kw quicker.

zoom : standard GCG prices, i think it was just under $2k

jay : yep, VERY pleased with the results, and more than happy i dont have to run high boost to get the power !

williamsf1 : i think it was $66 per hour (if my memory serves me) for mechanical labour, then $110 /hr for dyno tune ... 3 - 4 hours i think for a pfc tune .. GTR would be a lot easier to change injectors on as the gtst you have to remove the top half of the plenum ... not fun work ... you'd have to give him a call to see how much he knows about gtrs but i'd be VERY surprised if he didnt know everything there is to know about them ...

croat : yep, very happy, i basically went overkill with the fuel system in a paranoid kind of way, but am more than happy with the results ... and unfortunalty my mother unit arrives from the UK this week, so going to have to spend some time with her, not seen her for 18 months .. anyway, the good results are all down to the tuner knowing his stuff inside out ..

it hard to tell as i had the injectors done at the same time as the tune - yes the car feels VERY different, but thats prolly 90% due to the tune ...

didnt bother installing the fpr in the end, after talking with dave, it seemed that it was not really worth doing for hte kind of power levels i was after .... now its up for sale with the custom made elbow that replaces the existing fpr ...

cheers

Did you happen to have the car dynod on the same dyno before the upgrade? The percentage increase in power is far more telling then a 240rwkw figure.

:mad: good resutls by the way. I wish i made that sort of power at that boost...even if the dyno figure is a bit optimistic, anything around that figure with that sort fo boost is a good effort:)

didnt get a dyno pre tune, to be honest, not really bothered about pre tune power, just that it gives me a HUGE grin now !! :mad:)

the dyno used is aparently a very conservative dyno, its used for race and drag cars so i guess it has to be pretty much on the mark ...

but hey, i'm happy, thats all that counts !

Iwells - absolutly ... i have not seen more then 55% duty yet, and that was pushing it HARD in 3rd to redline ....

Trust - yeah, will get around to some track days .... not REALLY bothered about drag times, just bothered about having LOTS of fun with it ... before a track tho i need to sort of better breaks and harden up the front suspension .... prolly new sway bars as well as bushes ...

never stops does it ...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...