Jump to content
SAU Community

Webber cruisin' in da city... IN HIS F1!

Goon

By Goon,
in New South Wales

 Share

Recommended Posts

igor Rising Star

igor

Posted
Posted
cant wait i'll pull up to him and rev my rb20det and then its all on, nissan vs bmw ;)

Since Webber is only doing 90 KPH you will probably beat him too. THEN, you need to go to a more immature car forum than SAU and talk about your "road kill": "I blew the doors of an F1 the other day..." Now that's a kill. Considering Shumacher overtook a fighter jet on the takeoff, your chances remain slim if Webber gets pissed off.

lol

:(

Beer Baron Grand Master

Beer Baron

Posted
Posted

yeah, I think he thought they said '190kph'. it was stupid to have a limit anyway as I'm pretty sure an F1 car would have trouble travelling at <90 for any length of time.

silver gts-t Grand Master

silver gts-t

Posted
Posted

prob would have stalled at that speed,

on a serious note i was there offered weber to drive my car instead of the bmw, he agreed saying i could get to 90 faster in the line, but the premier wouldnt allow it due to the bad publicity of the skyline.

you know how it is

on a even more serious not, did you see how bumpy it was, :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By GTSBoy · Posted

      Hell, I'm sufficiently wary of the ZSS suspension arms, let alone something like a hub.
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      Got it back home and got started pulling the hub off and diagnose the issue. Axle was stuck after removing the 36mm nut so i used a 3 jaw puller to try and push it out and... eH5FXvJ8.mp4   spend the next few hours trying to remove the axle from the remaining hub as it was very much jammed in there when the spindle sheared off. resulting damage as below R53AIy6 - Imgur.mp4   Looks like the was already a stress fracturing in the spindle as can be seen with the darker cracked section My working theory is maybe when the pinion gear exploded last year the shock put through the hub was the initial crack. Then a few events later it finally let go. Just lucky it happened where it did and not 190km/h on the next sweeper or into the hairpin The bearing/hub assembly went in in 2019 and were non-genuine "ZSS" assemblies and no nails were harmed in the process. #BreakHubsNotNails
    • aneesr34
      Stock Airbox and Snorkle for RWC - VIC west

      By aneesr34 · Posted

      Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Dose Pipe Sutututu
      EFR7670 exhaust housing selection RB26

      By Dose Pipe Sutututu · Posted

      Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • GTSBoy
      EFR7670 exhaust housing selection RB26

      By GTSBoy · Posted

      People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
×
×
  • Create New...