Jump to content
SAU Community

street racer busted on sat night !!!


Recommended Posts

Have to agree...wen it comes to that split second of whether ur going to lose your car which you've spent sh1tloads of $$ on sometimes what is the right thing to do just doesnt come into the equation...the guy decided to put his foot down and i dont think any of you (unless youve been in the same situation) can judge and say that u definately wouldnt do it if ur car was about to be confiscated...

:werd:

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

like someones sig says

ban low performance drivers not high performance cars

leave the cars alone or we will get physical they do nothing wrong

do what you will with the driver........

but yeah you couldnt bag him for running but you could mock his Intelligence for doing so

The police have to get authorisation before engaging a high speed chase and they take into account all variables before taking action, but they kinda bend the rules when they do it.

Most probably, that is unless the dude stuffs up, and kills himself, then there is the outcry and they have to do all the proper investigation.. Thing is a 250kw+ silvia is probably going to pull away from a pursuit boat fairly easily anyhow. Unless the engine blows up :cheers: That just made a good story because they actually caught somebody. The amount of times that they don't is a lot. "street racer successfully runs away from cops" hardly makes the front page of the news.. for obvious reasons..

if it was a skyline the paper would have said 'Nissian Skyline' rather than 'Import' we all know that..............

i think they're stupid laws, i remember saying in a post about the new hoon laws that high speed chases would ensure. If the police got his plate number they should have stormed his house with a SERT team in the early hours of the morning and arrested him. not started up a chase...............

he should be banned from driving for a loooooooooooong time..........

Street Racing is NOT racing...

Take it to the drags or you deserve to get bum raped...people liek that cause the bacon to pick on those who have LEGAL imports and want to enjoy their cars...

Take it to the strip or go the **** home...

What the hell were cops doing trying to chase somebody going up to 200km/hr??

Cops should know when to pull off.. What happened if he had spun out and killed himself and others. Innocent bystanders, etc. Sure he shouldn't have been speeding, but it's a lesser of two evils I would have thought?

It would have been his own stupid fcukin fault!! What do the cops do let em go because they drive too fast? I hope the dickhead gets a good stint in a cell with bubba frankly. If you met the guy he would be a prize idiot too I'm guessing. Should have his car crushed in front of him and his licence CANCELLED.

well obviously he was breaking the law.. I just don't like propoganda when I see it.. disguised as a news story.

It would have been his own stupid fcukin fault!!

Well yes, but if he killed somebody else then you'd have to ask, is it worth the pursuit? The risk of taking lives, just for upholding the law. Even if it was his fault, put under the adrenaline he is more likely to screw up when pursued. It's happened many times in NSW, and many innocent people have been killed.

All they need to do is get the plates, and make a knock at his door the next day. I don't see why they have to be pursued there and then?

it was a Sil80 with a 20 in it, apparntly the dude had a chance but blew the motor and came to a grinding halt and thats when the boys in blue caught up wit him... rumor has it hes thrown alota cash at the engine.... theres a write up on it @ qldstreetcar

Yeh at the end of the day they would have had the rego of the car at way less than 200km/h+ and could have just called it off and waited at his house. Or at least followed a long way back. Provoking someone to speed is almost as bad as being the one speeding. What if he, police or innocent motorist had died because of the chase?

The 'HOON' would be blamed, because the police were 'protecting the innocent' even though they are putting everyone on that motorway at risk.

The above is alot safer for the police, the driver, and other innocent drivers on the motorway.

Im 19 and can figure that out, do police even think anymore?

man i cant believe the anty -hooning laws can just take your car and sell it without paying you any money. I would be going to court over that.

There is no way cops should be able to drive over 180kmph for their own safety and the safety of others!! I remember an ambulance got done a while back by a speed camera on the M1 doing 180kmph and there was all sorts of public outcry!!

They should have speed limiters. If you are driving at 100, or 110 and a car goes past at 180+ it is CRAZY and cops shouldn’t be able to do it!!

Theres an awful lot of moral outrage and high-horsing going on around here, especially considering the things I see the majority of SAU peeps do themselves.

No hypocricy from me, I'd be doing a runner too. ESPECIALLY if it was my 3rd warning and I was about to lose my car. I've whinged from the start that having a "3rd strike, youre out" rule was going to result in car chases. Of two people who have had their car taken from them, they both tried running. In a way, its kind of a pity there wasnt some sort of more serious outcome (although obviously not death or permanent injury) to give a wake-up call that taking someones pride and joy _IS_ going to result in desperate measures being taken.

I drive like a testical, and I'll be happy to be reamed in the bum if I ever get caught. But theres a big difference between losing your license, and losing your material goods. I'd like to see some peoples reactions to being caught for a 3rd time, especially in that first moment of panic the red and blue lights start flashing.

Maybe after being caught the first two times and losing your car overnight you'd think twice though right...? We're not talking about a little speeding here, I'm sure we're all guilty of that from time to time, but the "hooning" laws aren't applied on every Joe Citizen going 70 in a 60 zone in his company magna...

If you got caught street racing twice, had your car confiscated for a period of time, doing it again *knowing* what will happen if you get caught again (which is likely to happen since you've been caught twice already) and then regretting it when you see the cop lights would be pretty bloody stupid wouldn't it?

Bottom line is, if I knew I would lose my car next time I was caught I wouldn't be enough of an idiot to do it again. If this guy had got away with it, he just would have got caught some other night anyway.

Whether it's right to take a person's vehicle is another point altogether I think.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
×
×
  • Create New...