Jump to content
SAU Community

Recommended Posts

Hey ppl, i got some issues with the speedo in my ceffy. It seems to be out by aroung 20 km/h at 100, like i'm doin 100 but it says im doin 120. it seems to get progressivly further out, like at 60 it says im doin 70 and at 160, well the speedo is off the clock, and the speed limiter still hasn't cut in. at first i thought i had a lower diff ratio, but that doesn't explain the different variations. Also when I accelerate slowly the needle goes round smooth, but if i boot it the needle jumps 20 km/h at a time, like from 140 straight to 160. Anyone have any ideas???

Link to comment
https://www.sau.com.au/forums/topic/66617-speedo-problems/
Share on other sites

same problem here... (also the km readings are higher by around 20%, ie. clocks 1.2kms every 1km i travel... :D will be - factor when i sell the car)

in my case, the problem most definately is the small tyres that came with the car as my mechanical-minded friend told me (read sky80y) ;) the tyres on the car atm are 195/55/15s... i'm getting 205/60/15s soon...

Link to comment
https://www.sau.com.au/forums/topic/66617-speedo-problems/#findComment-1239750
Share on other sites

I think your needle is toast, I replaced my speedo because that happened to me, I have an aftermarket diff and 18"s on mine and my new speedo is only 5km/h out. When im doing 100 speedo reads 95. I got that information courtesy of a dyno

Link to comment
https://www.sau.com.au/forums/topic/66617-speedo-problems/#findComment-1239773
Share on other sites

205/60/15 are what i run, i thought my tires were to big, but if they were too big i'd be goin faster than what my speedy said, just on a side note, nissaner, do you go to the off street drift at oran park?

hmm... maybe the problem wasn't my tyres...

and no i'm yet to goto those drift meets in my ceffy... public streets are challenging enough for novice drivers like myself... :D

Link to comment
https://www.sau.com.au/forums/topic/66617-speedo-problems/#findComment-1239890
Share on other sites

I have been told also that they Ceffys have a common fault with Speedo cables breaking as I have been through 2 so far. ( have a few (4) coming from jap in the next container)

Also the sensor in the G/box has been know to do the jumpy thing in speed as it does it with my ARC-R

Will follow this up when it all arrives

Link to comment
https://www.sau.com.au/forums/topic/66617-speedo-problems/#findComment-1240503
Share on other sites

  • 2 weeks later...

my cef does the same thing with the speedo, i.e doin 100km/h on speedo but only doing 85km/h on the road. But mine has stock size rims/tires, i.e 195/60 15in. But i have a locked diff aftermarket manual conversion.

By the sounds of it this is a common problem.

David

Link to comment
https://www.sau.com.au/forums/topic/66617-speedo-problems/#findComment-1252448
Share on other sites

My speedo is consistantly 10% higher than what I'm actually doing, I base this on the speed reported by my Impakt DigiDash (takes it's data from the diagnostic port) and other traffic.

The needle also "floats" if you know what i mean, it just doesn't seem to move right and wobbles a bit back and forth from time to time, I have a feeling it might be the cable where it hooks up the back or gearbox isn't quite right but have yet to check it out.

Link to comment
https://www.sau.com.au/forums/topic/66617-speedo-problems/#findComment-1253545
Share on other sites

  • 2 weeks later...

I seem to be having the same problem with my cheffy. I just picked it up at Freo port today an it seems to be out around 10-15km at 60km/h. I know it has been converted from auto to manual, maybe they didnt get the manual sheepo cord.?

that is all I can think it might be as putting on bigger rims shouldnt change affect the speedo that much.

Link to comment
https://www.sau.com.au/forums/topic/66617-speedo-problems/#findComment-1277373
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW )
    • But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
×
×
  • Create New...