Jump to content
SAU Community

SAU Vic General Meeting - Tuesday 15th March 2005 **NEW LOCATION**

adznight

By adznight,
in Archived Events

 Share

Recommended Posts

adznight Newbie

adznight

Posted
Posted

Hi all, Its time for our General Meeting and as most of you will know the Whitehorse is now gone forever.....Whyyyyyy! Our new location is quite good and very different so it would be great to see an many members as possible there. We will be testing this location to see how things go then will make a decision from there

Now, why would I repost my last meeting post? I'm getting lazy thats why! You guys know the drill though....

It's SAU Vic General Meeting time. Thats right, Beer, Food, Cars and laughs! This is a great opportunity for those of you who don't know too many members to come down and mix.

This meeting will cover the usuall things, info on past events, pressing maters, SAU Merchandise will be available etc.

These meeting are used for the members and committee to talk about whats happening behind the scenes, to discus upcoming events and provide an excellent opportunity for you the SAU Vic members to discus your own issues and ideas. Don't forget this is YOUR club and what happens is in YOUR hands :rant:

  • Time - 8:00pm (Dinner from 7:00ish)

  • Date - Tuesday 15th of March 2005

  • Location - Bell's Hotel, 157 Moray St, South Melbourne (Cnr Moray St & Coventry St Melways Ref - 57, G1)

Note - We will be meeting in the conferenceentertainment room - this area is family friendly and set aside for us. There is plenty of seating (tables and chairs) and meals for all.

  • Who is welcome - Everyone!

2471Bell_s_Hotel.jpg

Snowman Grand Master

Snowman

Posted
Posted

Actually guys - they have more than one "function" area at this pub including one up-stairs. For this up-coming date there is another function being held so we are not 100% sure which room we are in - so if you arrive and can't find us just ask at the bar.

Normally we will be in the front room that looks out onto Moray St at the Northern End of the pub and I still hope we will be there for this meeting as well.

saff_cossie Grand Master

saff_cossie

Posted
Posted

The Bells are very much "for" Skylines. When I spoke to the owner initially he had a mate with one and they also host other car club meetings like the RS club.

There is a fair bit of parking but just double check the times on the signs and it is mainly angled, street parking. They are all offices around there and not too many residences.

joelstrick Proficient

joelstrick

Posted
Posted
That would be awesome! In your professional opinion, how good did the majority of the photo's turn out?

Pics look great

They got sent off to mag today over 100 of them in the end

 Share
Go to topic listing


  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...