Jump to content
SAU Community

Recommended Posts

Well my girlfriend was trying to convince me for some time now to let her drive my R32, and i kept getting out of it with all sorts of excuses. She just wouldn't take NO for an answer.

Well she finally convinced me, and 5 minutes later, she hit the gutter. She wasn’t going fast maybe 20 km/h so I didn’t expect much damage.

I tried my best not to get upset and even after assessing the damage on the wheel i was still ok, but then I started driving the car home and the steering wheel is off centre. GRRRRRRR.

So what could possibly be damaged?

Would a simple 4 wheel alignment fix the problem?

Can any place like Peders do the wheel alignment on a Skyline or maybe i should go somewhere else?

Also, can they check if my steering wheel is properly aligned coz I’ve been having a few HICAS issues. The steering sensor is not on 12-6 o’clock . It’s more like 10-4 o’clock.

I know f**k all about suspension so any help will be appreciated.

A Skyline is a lot diff at the front than a S13 having a double wishbone front susp setup. There is also a good chance that you've also bent a control arm. Take it to a more specialist suspension place so they can measure everything up then get the alignment done.

yeah id say ure alignment is just knoocked out...........

walk up to your girlfriend and slap her with the bill !

then tell her she is too only sit in the passenger seat and do nothing else!......

if u do this she will neva ask about the car and it wont come up in conversation.....hahahah

You won't just knock the alignment out.

Something under there is bent, simple as that.

Either make her pay or kick yourself for taking the risk.

Back to the car though, go get a 28 point inspection at pedders or any other suspension shop for the full report.

Geezzz....glad i never let my gf drive my car.....just confirmed my fears of doing so. but yeah....in regards to the car, id say its not just an alignment issue, how fast and hard did she hit the curb....must of been a bit of an impact to cause suspension damage.

Thanx for your help guys.

I think i'll just take it to the Peders 28 point obligation free inspection to see if they can pin point the problem and I'll take it from there.

If it's a bent steering arm, can they fix it or it has to replaced? Cost?

I've learnet my lesson but I wont be taking any money from her. It wouldn't be nice but she is much nicer when she's feeling guilty. :)

My other half has had quite a bad run with my cars in the past. :)

Car Number 1.

My Super clean N/A VL 5speed.

It was so clean it was like it just rolled off the factory floor.

I let my other half drive, she was learning at this stage.

Joel: Sit back, there's no need to sit so close to the car in front.

Julie: Its ok I won't hit him.

Joel: Its just a matter of time.

At that moment Julie looked over her shoulder to check her blind spot.

arrrrggg the car in front broke and we cliped his rear bumper ripping off my plastic fantastic VL front bumper. :) No body damage luckly.

Car Number 2.

Almost bran spankin new VS 5ltr 5speed Exec FE2, SRS, ABS, IRS Commodore.

I only just got the car back from a few mods.

I spent a lot of $$ on that car.

Full Whiteline suspension kit, Adj. swaybars the whole lot.

3.5" exhaust (single straight through muffler that was no bigger than a shoebox), pacemaker extractors, mild cam and had the ecu done. (Still made stuff all power) lol

I was replacing Julies parents brakes on their VN commodore.

Julie: Joel, I'm going to wash the car.

Joel: Yep ok.

Julie walks over to the second drive way and starts the VS.

The sweet V8 brup brup brup I hear.

Next minute I hear the VS still idling but slowly getting further and further away. :(

I look up and see Julie starting the car behind the VN that was in the drive way. At that moment I hear an almighty BANG and a distant sweet brup brup brup sound. :)

OMFG I thought.. I looked across the road.

The damn car had rolled down the drive way, some how bounced around a parked car and hit the house across the road!!!!.

I'll finish it there. lol

she mite have bent the steering arm best solution put her in the back and your pet dog at the front and crank up the music

Hahahaha, I did that with my ex...thus the ex...

I actually bought the line off my girlfriend...so she drives it whenever, I have actually damaged the thing more than she has...( I bent the front bar in a paddock, yes a paddock dont ask...)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...