Jump to content
SAU Community

Recommended Posts

Hi there guys, just trying to find myself a new replacement set of bulbs or just bulb for my r32.

The bulb is H3C is that right?

Any suggestions/reccommendations would be appreciated. I tried that little 'car accessories' shop in carousel, they said they ran out.

Anyways, cheers.

I had success with my bolbs at Carquest in East Perth, Shop 9 Piccadilly Square, 5 Short St. They have website but you prob wont find the bolbs listed on there www.carquest.com.au

I'd go in there, I hunted everywhere and found most of the stuff there.

Ciao!

Im pretty sure mine are not H4 (r32 gtr), as ive tried those and its a total different design, my mechanic said they were H3C - i think he said they were same as s13 sil, not 100% sure but its def not H4 for mine.

Most places i found dont stock the H3C.

Thanks every one for your help, cheers.

When trying to find parts for an import ure best bet is to ripp it out and take it in and match it up with what ever they have, usually they have some crazy ass number on the side that gets you nowhere but the part is exactly the same as a standard part from a commo or something. just a bit of advice coming from the guy who get weird looks when he says

Me- "its a nissan auster"

Repco/any car guy- "Nissan what?!?!?!"

My right hand indicator bulb has blown twice in two months :D

Stop overtaking people so much, then you wont need to use your right indicator so much (haha)

speaking of blown bulbs, my ute has chewed 3 LHS bulbs in a month....sus, must be something im doing wrong

hey speaking of bulbs? i have a gtst, its has park light, projector and high light in one cluster (like gtr) but are those bulbs (main light, projector) H1 or H3C cos i am trying to find white/blue lights for my line? any advice anyone?

hey speaking of bulbs? i have a gtst, its has park light, projector and high light in one cluster (like gtr) but are those bulbs (main light, projector) H1 or H3C cos i am trying to find white/blue lights for my line? any advice anyone?

Pretty sure it would be h3c, but i could be wrong, the H3C just has 2 big prongs on the bottom, just do what the others said and rip one out and take them out and about.

As for blue/white in H3C - i found them virtually impossible to find in Perth, maybe some where east has them readily available not quite sure, i found them hard enough to find 'normal' globes in the H3C pattern.

if you really want the blue/white look, id personally go a HID conversion, theres a bloke in the Forsale/parts section selling them for about 350-400 i think. Id pick up a set straight away, if i didnt have to buy so many uni books this semester :P

neways, good luck :)

  • 4 weeks later...
ok, i was looking at ebay, is there any difference between H3 and H3C? just want confirmation cos they do sell blue/white lights in both these codes..

Yep, they are different - take a look at www.narva.com.au/Globes_16.html and you will see the difference.

The main difference is that H3 has one prong, whereas H3C has two prongs (positive and ground).

My r32 has H3C bulbs in them aswell, but i was told that you can put in H3 and just attach it using the positive side of your plug. In saying this, does it mean that the H3 (and the H1 for that matter) doesn't need a ground wire since they only have 1 attachment?

Most companies only stock the standard light colour for the H3C, whereas you can get blue, white, arctic blue etc in the H3.

Anyone tried replacing the bulbs like this?

Just replaced my H3C bulbs with H3 bulbs...

Since the h3c bulb has 2 connectors and the h3 has 1, all you need to do is solder a piece of wire to the metal base of the h3 bulb and attach it to the ground wire in your headlight loom. The other wire just plugs into the positive side.

**The headlights that normally use h3 bulbs are already grounded hence no need for an extra wire.**

Works perfectly. :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...