Jump to content
SAU Community

Recommended Posts

Hi there guys, just trying to find myself a new replacement set of bulbs or just bulb for my r32.

The bulb is H3C is that right?

Any suggestions/reccommendations would be appreciated. I tried that little 'car accessories' shop in carousel, they said they ran out.

Anyways, cheers.

I had success with my bolbs at Carquest in East Perth, Shop 9 Piccadilly Square, 5 Short St. They have website but you prob wont find the bolbs listed on there www.carquest.com.au

I'd go in there, I hunted everywhere and found most of the stuff there.

Ciao!

Im pretty sure mine are not H4 (r32 gtr), as ive tried those and its a total different design, my mechanic said they were H3C - i think he said they were same as s13 sil, not 100% sure but its def not H4 for mine.

Most places i found dont stock the H3C.

Thanks every one for your help, cheers.

When trying to find parts for an import ure best bet is to ripp it out and take it in and match it up with what ever they have, usually they have some crazy ass number on the side that gets you nowhere but the part is exactly the same as a standard part from a commo or something. just a bit of advice coming from the guy who get weird looks when he says

Me- "its a nissan auster"

Repco/any car guy- "Nissan what?!?!?!"

My right hand indicator bulb has blown twice in two months :D

Stop overtaking people so much, then you wont need to use your right indicator so much (haha)

speaking of blown bulbs, my ute has chewed 3 LHS bulbs in a month....sus, must be something im doing wrong

hey speaking of bulbs? i have a gtst, its has park light, projector and high light in one cluster (like gtr) but are those bulbs (main light, projector) H1 or H3C cos i am trying to find white/blue lights for my line? any advice anyone?

hey speaking of bulbs? i have a gtst, its has park light, projector and high light in one cluster (like gtr) but are those bulbs (main light, projector) H1 or H3C cos i am trying to find white/blue lights for my line? any advice anyone?

Pretty sure it would be h3c, but i could be wrong, the H3C just has 2 big prongs on the bottom, just do what the others said and rip one out and take them out and about.

As for blue/white in H3C - i found them virtually impossible to find in Perth, maybe some where east has them readily available not quite sure, i found them hard enough to find 'normal' globes in the H3C pattern.

if you really want the blue/white look, id personally go a HID conversion, theres a bloke in the Forsale/parts section selling them for about 350-400 i think. Id pick up a set straight away, if i didnt have to buy so many uni books this semester :P

neways, good luck :)

  • 4 weeks later...
ok, i was looking at ebay, is there any difference between H3 and H3C? just want confirmation cos they do sell blue/white lights in both these codes..

Yep, they are different - take a look at www.narva.com.au/Globes_16.html and you will see the difference.

The main difference is that H3 has one prong, whereas H3C has two prongs (positive and ground).

My r32 has H3C bulbs in them aswell, but i was told that you can put in H3 and just attach it using the positive side of your plug. In saying this, does it mean that the H3 (and the H1 for that matter) doesn't need a ground wire since they only have 1 attachment?

Most companies only stock the standard light colour for the H3C, whereas you can get blue, white, arctic blue etc in the H3.

Anyone tried replacing the bulbs like this?

Just replaced my H3C bulbs with H3 bulbs...

Since the h3c bulb has 2 connectors and the h3 has 1, all you need to do is solder a piece of wire to the metal base of the h3 bulb and attach it to the ground wire in your headlight loom. The other wire just plugs into the positive side.

**The headlights that normally use h3 bulbs are already grounded hence no need for an extra wire.**

Works perfectly. :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...