Jump to content
SAU Community

$30 Dyno Runs! - Chip Control Mini Dyno Day 4th April

RBN1

By RBN1,
in Archived Events

 Share

Recommended Posts

RBN1 Mentor

RBN1

Posted
Posted

hi guys,

Chip Control - the company that is sponsoring my R32 N1 GTR race car is holding a mini dyno day on 9th April. Why so cheap? Well Scott Hendren the owner has replaced his old dyno with a brand new Dyno Dynamics Dyno and wants to give it a bit of a run.

All you have to do is go to http://www.chipcontrol.com.au register on the forums and send Scott an e-mail letting him know that you are coming.

Note : there will be no tuning just 2WD dyno runs and Chip Control is located in Sunbury. I will post more specific info like times etc early next week.

Also i've corrected the date to Sat 9th April

A note from Chip Control-

"We are looking at starting the day at about 9.00am,

Dyno runs will be in the order of arrival,

On the day Photos will be taken of your vehicle and pasted in the picture gallery for public viewing.

You will all receive a Dyno print-out of your run.

You will have a choice in how you want your power graph to display.

For example: AFR, Torque etc.

We'll see you all on the day. "

Shivam.

Al Grand Master

Al

Posted
Posted

I have actually driven it dip shit, and if you can't see the differance between jealousy and some friendly teasing well shove it up your ass!

Great going Scoota, first post and all you bothered to do was; miss read my post and insult me. Not bad from a person that is trying to organise their first event with SAU.

RBN1 Mentor

RBN1

Posted
  • Author
Posted
I have actually driven it dip shit, and if you can't see the differance between jealousy and some friendly teasing well shove it up your ass!

Great going Scoota, first post and all you bothered to do was; miss read my post and insult me.  Not bad from a person that is trying to organise their first event with SAU.

Al, he was kidding around. Take it easy. He wasn't trying to organise anything for SAU. I thought it would be beneficial for our guys to get a $30 dyno run. Please try and organise something cheaper if you think you can.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • PranK
      eBay "Hella" oil level sensor

      By PranK · Posted

      Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • Kinkstaah
      Jacks that fit under GTR lips that can reach the subframe?

      By Kinkstaah · Posted

      I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • TurboTapin
      Jacks that fit under GTR lips that can reach the subframe?

      By TurboTapin · Posted

      So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...